| 2025-09-15 |
Polyphenol?Mediated Engineering of Lipid Nanoparticles With Crystalline Mesophases |
| 2025-09-14 |
M/G?Ratio?Tuned Calcium Alginate Hydrogel Microcarrier for Controlled Delivery of Adeno?Associated Virus for Gene Therapy |
| 2025-09-01 |
3D Printing ?-TCP-laden GelMA/Alginate interpenetrating-polymer-network biomaterial inks for bone tissue engineering |
| 2025-09-01 |
Corrigendum to “Developing polymer nanocomposite films of ZnO/NiFe2O4 nanohybrids, polyvinyl pyrrolidone, and chitosan for flexible electromagnetic applications and energy storage devices” [Ceram. Int. 50 (2024) 28794–2880] |
| 2025-09-01 |
Effect of piezoelectric ceramic on natural frequency, structural, and thermal properties of additively manufactured PLA/BTO composite structure |
| 2025-08-29 |
Dual?Cation Solvation Polymer Gel for Ultra?Stable Zn Anodes in Rechargeable Flexible Zn?Air Batteries |
| 2025-08-28 |
Robocasting of a Water?Based Biopolymer/WO3 Nanopowder Paste as a Precursor to Tungsten Carbide Lattices |
| 2025-08-28 |
Advances in Screen?Printed Conductive Inks for Sustainable and High?Performance E?Textiles: Innovations, Challenges, and Future Prospects |
| 2025-08-22 |
Exceptional n?Type Ionic Thermoelectric Hydrogels by Synergistic Hydrophobic and Coordination Interactions |
| 2025-08-22 |
Production of recombinant methionine?containing elastin?like polypeptides in a fermenter using ECPM1 medium |
| 2025-08-18 |
In Vivo Degradation and Local Tissue Response of Experimental Carp Collagen Membranes: Micro?MRI and Histological Analysis |
| 2025-08-17 |
Additive Manufacturing of Thermal Energy Storage Composites with Microencapsulated Phase Change Materials Supported in a Multipolymer Matrix |
| 2025-08-17 |
Microcellular Poly (Ethylene?Co?Vinyl Acetate)/Lignin Nanocomposites for Soft Ferroelectrets |
| 2025-08-13 |
Additive Manufacturing of Fe?AZ31 Immiscible Bimetallic Composites for Degradable Implants |
| 2025-08-10 |
Multiscale Modeling of Process?Induced Defects in Fused Filament Fabrication?Printed Materials |
| 2025-08-05 |
Volumetric 3D Printing and Melt?Electrowriting to Fabricate Implantable Reinforced Cardiac Tissue Patches |
| 2025-07-31 |
Zinc?Coordinated Trienzyme Nanogel Cascade Therapy for Accelerated Post?Pancreatectomy Cutaneous Wound Healing |
| 2025-07-30 |
In Vivo Wound Healing and Immune Response Studies of Chitosan Cryogels With Invertebrate Model Organism Galleria mellonella |
| 2025-07-30 |
Fabrication and Characterization of 3D Printed Polycaprolactone/Baghdadite/Zinc Oxide Nanocomposite Scaffolds for Bone Tissue Engineering |
| 2025-07-14 |
Cottonseed?Derived Reusable Bio?Carbon Gel Ink for DIW Printing Soft Electronic Textiles |
| 2025-07-11 |
Light?Activated Transient Unilateral Adhesive Recombinant Collagen?Based Hydrogel for Reversible Fibrosis Induction and Full?Cycle Management of Pancreatic Fistula |
| 2025-07-10 |
A Sprayable Hydrogel Based on Biomimetic Polypeptide?Modified Lipid Nanoparticles for Treating Non?Compressible Hemorrhaging (Adv. Mater. 27/2025) |
| 2025-07-09 |
Realizing Multicolor, 3D?Printable Ultralong Room Temperature Phosphorescence PLA Materials via Regulating the ??System of Aryl?Annulated Carbazoles |
| 2025-07-07 |
Biomimetic Mineralization Nucleation with Polymer Template Enabled High?Performance Perovskite Solar Cells by Anti?Solvent?Free Technology |
| 2025-07-01 |
Comparative Biomechanical Evaluation of Spinal Cages Made from PCL, PEEK, and Ti6Al4V via Support?Free Additive Manufacturing |
| 2025-06-30 |
Heterogeneous Polymer Multilayers Enabling Photoresponsive Nonreciprocal Patterns for Information Encryption |
| 2025-06-30 |
Surface?Engineering Cellulose Nanofibers via In Situ PEDOT Polymerization for Superior Thermoelectric Properties |
| 2025-06-24 |
Modulating Dynamic Deprotonation Evolution via Sacrificial Solvation Structure to Mitigate Zinc Electrochemical Corrosion and Cathodic Structure Deterioration for High?Stable Zinc?Vanadium Batteries |
| 2025-06-17 |
Crystallinity?Induced Ion Rectification in Polymer/Zn Interphases for Stable Aqueous Zinc Batteries |
| 2025-06-13 |
On?the?Fly Synthesis of Freestanding Spin?Crossover Architectures With Tunable Magnetic Properties |
| 2025-06-11 |
From Physical Cross?Linking to Tailored Phosphorylation: Unlocking High?Performance and Biocompatible Xanthan?Konjac Hydrogels for Zinc?Ion Batteries |
| 2025-06-11 |
Synthesis and Investigation of Albumin Nanoparticles Loaded With Anti?Tuberculosis Drug Isoniazid |
| 2025-06-07 |
Rewiring Cupriavidus necator for Enhanced Polyhydroxybutyrate Production via Genetic Toolkits and Feeding Strategy |
| 2025-06-04 |
Modular Molecular Editing of End?of?Life PBT for High?Performance Sustainable and 3D?Printable Platforms |
| 2025-05-31 |
Bioresorbable Composite Polymeric Stents: Alleviating Deployment Damage and Maintaining Significant Mechanical Properties |
| 2025-05-31 |
Rapid Quantitative Assessment of Residual Stress States in PLA Components Enabled by the Combination of Photoelasticity and the Hole Drilling Method |
| 2025-05-29 |
A smart cubebinol–CuO nanocomposite for dual electrochemical sensing and visible-light-driven photodegradation of tetracycline: Box–Behnken optimization, mechanistic insight and kinetics |
| 2025-05-23 |
Protein?Nonfouling and Cell?Binding Polysulfobetaine Inducing Fast Transcytosis for Tumor?Active Drug Delivery |
| 2025-05-16 |
Traceless Photopolymerization with Non?Pulsed Red Light Enables 3D?Printable Cell?Laden Hydrogels |
| 2025-05-12 |
Cleanly Removable and Degradable Bio?Based Adhesive for Flexible Displays |
| 2025-05-07 |
Studies on Gelatin?Keratin?Chitosan Functionalized Silver Nanoparticles Based Bionanocomposite Films With Improved Antimicrobial and UV?Blocking Properties |
| 2025-05-04 |
A Phosphorus and Nitrogen Containing Halloysite Derivative as Multifunctional Flame Retardant for Biobased Polyamide 56 |
| 2025-04-30 |
Influence of Produced Water and Light Irradiation on the Composition of Exopolysaccharide Produced by L. amnigena Evaluated by Raman Spectroscopy |
| 2025-04-30 |
Production and Characterization of Plant Extract?Based Cell?Friendly and High Mechanical Strength Nanofiber Wound Dressings by Electrospinning Technique |
| 2025-04-21 |
An Optimized Aerogel?Based Apheresis Device for Targeted Lipid Clearance in Elderly Hyperlipidemia Patients |
| 2025-04-19 |
Copper Removal with Zeolite/Polylactic Acid Beads: Neural Networks and Fixed?Bed Column Insights |
| 2025-04-18 |
Berberine Ameliorates Pulmonary Fibrosis by Inactivating the Thrombospondin 2/Smad Homolog 2/3 Pathway |
| 2025-04-16 |
High?Performance Recyclable Polyester Elastomers Through Transient Strain?Stiffening |
| 2025-04-15 |
A Controlled?Release Biofertilizer Using Composite of Poly (Urea–Formaldehyde), Date Seeds and Sulfate of Potash?Magnesia (2MgSO4·K2SO4) as All?Biodegradable With Antimicrobial Potentials |
| 2025-04-09 |
Polymer biodegradation by Halanaerobium promotes reservoir souring during hydraulic fracturing |
| 2025-04-07 |
Expanded Nanofibrous Cellulose Electrode Binder: Declustering Lithium Polysulfides for Lean?Electrolyte Li?S Batteries |
| 2025-04-01 |
Enhanced Mechanical Properties of Injectable Chitosan–Guar Gum Hydrogel Reinforced with Bacterial Cellulose Nanofibers for Tissue Engineering Applications |
| 2025-03-28 |
Design and Evaluation of 3D?Printed Polylactic Acid Composites Reinforced with Biodegradable Bamboo Powder and Jute Powder |
| 2025-03-27 |
Degradable Additive Couple Enable Pure and Stable Alpha?Phase FAPbI3 for Perovskite Solar Cells |
| 2025-03-26 |
Correction to “Stabilization of Collagen Through Bioconversion: An Insight in Protein–Protein Interaction” |
| 2025-03-25 |
Effect of nucleophilic additives on phosphoric acid pretreatment of lignocelluloses |
| 2024-11-14 |
Covalent Immobilization of Cellulase Enzyme on Chitosan and Eudragit S-100 Biopolymers for Recovery and Reusability in Denim Fading Application |
| 2024-11-13 |
Engineering PLA-MXene nanocomposite with balanced mechanical properties for enhanced shape memory effect |
| 2024-11-13 |
Review of the NRC Canada studies on fire resistance of floor assemblies: Results, design guidelines and research gaps |
| 2024-11-13 |
Lignin–Poly(vinyl alcohol) Compound from Acetalization Synthesis as a Reinforcing Filler for High-Performance Gel-Spun Fibers |
| 2024-11-13 |
Preparation and performance study of heparinized multi?walled carbon nanotube/cellulose acetate hemodialysis membrane |
| 2024-11-11 |
Thermal Condensation of Dehydrogenation Polymer (DHP) with Xylose |
| 2024-11-11 |
Synthesis of Amorphous Cellulose Derivatives via Michael Addition to Hydroxyalkyl Acrylates for Thermoplastic Film Applications |
| 2024-11-11 |
Developing and Characterizing a Biocompatible Hydrogel Obtained by Cross-Linking Gelatin with Oxidized Sodium Alginate for Potential Biomedical Applications |
| 2024-11-11 |
3D?Printed Gelatin?Based Scaffold Crosslinked by Genipin: Evaluation of Mechanical Properties and Biological Effect |
| 2024-11-11 |
Study on a new prospective coating for improving corrosion resistance of magnesium alloy stents with deformation |
| 2024-11-11 |
Printing with Natural Dye Extract from Japanese Knotweed Leaves |
| 2024-11-10 |
Crystallization, thermal, and compatibility performances of poly (butylene succinate) (PBS)/poly((R)?3?hydroxybutyrate?co?(R) 3?hydroxyhexanoate) (PHBHHx) blends |
| 2024-11-10 |
Localized Thermoresponsive Behavior in P(NIPAm?co?AAc) Copolymers: Structural Insights From Rheology and Small Angle X?Ray Scattering |
| 2024-11-10 |
Biodegradable Polyurethane Foams Based on Polyols Obtained from Cellulose and Its Hydroxypropyl Derivative |
| 2024-11-09 |
Multiphase Biopolymers Enriched with Suberin Extraction Waste: Impact on Properties and Sustainable Development |
| 2024-11-09 |
Development and Characterization of 3D-Printed PLA/Exfoliated Graphite Composites for Enhanced Electrochemical Performance in Energy Storage Applications |
| 2024-11-09 |
Crystallization behavior and thermal properties of octa-phenyl-substituted silsesquioxane-modified polylactide (PLA) |
| 2024-11-09 |
Dynamic Analysis and Vibration Control of Additively Manufactured Thin-Walled Polylactic Acid Polymer (PLAP) and PLAP Composite Beam Structures: Numerical Investigation and Experimental Validation |
| 2024-11-09 |
Preparation of hemp?based biocomposites and their potential industrial application |
| 2024-11-09 |
A comprehensive study on the application properties of different soft, hard, and functional monomers to polyacrylate emulsion and water?based inks |
| 2024-11-09 |
Thermoplastic Starch with Maltodextrin: Preparation, Morphology, Rheology, and Mechanical Properties |
| 2024-11-08 |
Mechanoresponsive self?powered piezoelectric energy?generating composite hydrogels based on carbon nanotube?reinforced fungal?carboxymethyl chitosan?bacterial cellulose nanofibers for wearable electronics |
| 2024-11-08 |
Evaluation of SMA-13 Asphalt Mixture Reinforced by Different Types of Fiber Additives |
| 2024-11-08 |
Design of cellulose nanocrystal?integrated poly(vinyl alcohol)/polyethylene glycol electrospun nanofiber scaffolds for biomedical applications |
| 2024-11-08 |
Nanocellulose?reinforced, anti?freezing, highly conductive ionic organic hydrogels for flexible electronic devices |
| 2024-11-07 |
Application of Chitosan and Its Derivatives Against Plant Viruses |
| 2024-11-07 |
Recycling of biodegradable biobased polymer/agave fiber biocomposites |
| 2024-11-07 |
Epoxy composites produced via sodium alginate?mediated Ca crosslinking of MXene and boron nitride fillers with excellent thermal conductivity and electromagnetic interference shielding effectiveness |
| 2024-11-07 |
Biobased ternary composites for food packaging: influence of natural plasticizers and starch on polylactic acid performance |
| 2024-11-06 |
Novel Hybrid Catalysts of Cysteine Proteases Enhanced by Chitosan and Carboxymethyl Chitosan Micro- and Nanoparticles |
| 2024-11-06 |
Electrical conductivity enhancement of chopped carbon fiber?reinforced epoxy composite bipolar plate for proton exchange membrane fuel cells |
| 2024-11-06 |
Modeling the Production Process of Lignin Nanoparticles Through Anti-Solvent Precipitation for Properties Prediction |
| 2024-11-06 |
Paper?based sensors for real?time cure monitoring in the production of glass fiber?reinforced phenol?formaldehyde composites for aerospace interiors |
| 2024-11-06 |
Advancing optical transparency in 3D?printed PLA parts using chemical post?processing |
| 2024-11-06 |
Biotoxicity Evaluation of Biodegradable Polymeric Particles: Exploring the Possible Adverse Impacts on Biological Systems |
| 2024-11-06 |
Polyhydroxyalkanoates: Medical Applications and Potential for Use in Dentistry |
| 2024-11-06 |
Advanced Biomaterials for Lacrimal Tissue Engineering: A Review |
| 2024-11-06 |
Construction of Aligned Polycaprolactone/Poly(Glycerol Sebacate)/Polysulfone Nanofibrous Scaffolds for Tissue Engineering of the Ventricularis Layer of Heart Valves |
| 2024-11-05 |
The Influence of In-Mould Annealing and Accelerated Ageing on the Properties of Impact-Modified Poly(Lactic Acid)/Biochar Composites |
| 2024-11-05 |
Customising Sustainable Bio-Based Polyelectrolytes: Introduction of Charged and Hydrophobic Groups in Cellulose |
| 2024-11-05 |
New Materials from the Integral Milk Kefir Grain Biomass and the Purified Kefiran: The Role of Glycerol Content on the Film’s Properties |
| 2024-11-05 |
An Assessment of the Catalytic and Adsorptive Performances of Cellulose Acetate-Based Composite Membranes for Oil/Water Emulsion Separation |
| 2024-11-05 |
In Vitro Degradation of Collagen-Based Membranes for Guided Bone Regeneration After Zn-Ions or Doxycycline Functionalization |
| 2024-11-05 |
Proposal of a Biobased and Biodegradable Polymer as a Hot Embossing Substrate for Holographic Security Marks Fabrication |
| 2024-11-05 |
A New Approach to Implementing 3D-Printed Material Structures for Protective Gloves with the Use of Ultrasonic and Contact Welding Processes: A Preliminary Study |
| 2024-11-05 |
Electrospun Polylactic Acid/Polyethylene Glycol/ Silicate?Chlorinated Bioactive Glass Composite Scaffolds for Potential Bone Regeneration |
| 2024-11-04 |
Rapid Synthesis of Self?Healing, pH?Responsive IA?Based Hydrogels via Frontal Polymerization |
| 2024-11-04 |
Correction: El-Hefnawy et al. Fabrication of Nanofibers Based on Hydroxypropyl Starch/Polyurethane Loaded with the Biosynthesized Silver Nanoparticles for the Treatment of Pathogenic Microbes in Wounds. Polymers 2022, 14, 318 |
| 2024-11-04 |
Coassembly of a Hybrid Synthetic–Biological Chitosan-g-Poly(N-isopropylacrylamide) Copolymer with DNAs of Different Lengths |
| 2024-11-04 |
Nanocellulose?Incorporated Composite Membranes of PEO?Based Rubbery Polymers for Carbon Dioxide Capture |
| 2024-11-04 |
Synthesis and Application of Biodegradable Cellulose Hydrogels From Sunflower Husks as a Water?Retaining Material in Agriculture |
| 2024-11-03 |
Optimization Parameters for PLA Through Additive Manufacturing: Taking Mixed Shapes as an Example |
| 2024-11-03 |
UV ozone?modified Fe3O4?PDMS film for solvent?driven soft actuators with controlled and multi?stable deformations |
| 2024-11-02 |
Foundation Model Study on Inorganic and Biopolymer Nano Additives Treated Soil—A Step Forward in Nano Additive Soil Stabilization |
| 2024-11-02 |
Effect of Fiber Cross-Sectional and Surface Properties on the Degradation of Biobased Polymers |
| 2024-11-01 |
Polymer Electrolytes with High Ionic Conductivities at Freezing Temperature for Aqueous Hybrid Batteries |
| 2024-11-01 |
Ameliorating and Tailoring The Morphological, Structural, and Dielectric Characteristics of SiO2 /NiO Futuristic Nanocomposites Doped PVA-PEG for Nanoelectronic and Energy Storage Applications |
| 2024-10-31 |
Cyclic Performance of Reinforced Concrete Columns Strengthened with Basalt-Fibre-Reinforced Cementitious Matrix (BFRCM) |
| 2024-10-31 |
The Excellent Chemical Interaction Properties of Poloxamer and Pullulan with Alpha Mangostin on Amorphous Solid Dispersion System: Molecular Dynamics Simulation |
| 2024-10-31 |
Development of Polymer Composite Membrane Electrolytes in Alkaline Zn/MnO2, Al/MnO2, Zinc/Air, and Al/Air Electrochemical Cells |
| 2024-10-31 |
Effect of Medium-Chain-Length Alkyl Silane Modified Nanocellulose in Poly(3-hydroxybutyrate) Nanocomposites |
| 2024-10-31 |
The Properties of Thin Films Based on Chitosan/Konjac Glucomannan Blends |
| 2024-10-31 |
Biobased Compostable Plastics End-of-Life: Environmental Assessment Including Carbon Footprint and Microplastic Impacts |
| 2024-10-31 |
Evaluation of Blended Poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) Properties Containing Various 3HHx Monomers |
| 2024-10-31 |
Creation of Composite Aerogels Consisting of Activated Carbon and Nanocellulose Blended with Cross-Linked Biopolymers: Application as Ethylene Scavengers |
| 2024-10-31 |
Dual Loading of Trans-Cinnamaldehyde and Either Paclitaxel or Curcumin in Chitosan Nanoparticles: Physicochemical Characterization and Biological Evaluation Against MDCK and HeLa Cells |
| 2024-10-31 |
Enhancement of 5-Fluorouracil Drug Delivery in a Graphene Oxide Containing Electrospun Chitosan/Polyvinylpyrrolidone Construct |
| 2024-10-31 |
A Novel Triad of Bio-Inspired Design, Digital Fabrication, and Bio-Derived Materials for Personalised Bone Repair |
| 2024-10-30 |
Application of Poly(lactic Acid) Composites in the Automotive Sector: A Critical Review |
| 2024-10-30 |
Characterization of Mixtures Based on High-Density Polyethylene and Plasticized Starch |
| 2024-10-30 |
Innovative Biocompatible Blend Scaffold of Poly(hydroxybutyrate-co-hydroxyvalerate) and Poly(ε-caprolactone) for Bone Tissue Engineering: In Vitro and In Vivo Evaluation |
| 2024-10-30 |
Ultrasonic Production of Chitosan Nanoparticles and Their Application Against Colletotrichum gloeosporioides Present in the Ataulfo Mango |
| 2024-10-30 |
Processing and Properties of Polyhydroxyalkanoate/ZnO Nanocomposites: A Review of Their Potential as Sustainable Packaging Materials |
| 2024-10-30 |
Chitosan Nanoparticles Embedded in In Situ Gel for Nasal Delivery of Imipramine Hydrochloride: Short-Term Stage Development and Controlled Release Evaluation |
| 2024-10-30 |
De- and Re-Structuring of Starch to Control the Melt and Solid State Visco-Elasticity as Method for Getting New Multi Component Compounds with Scalable Properties |
| 2024-10-30 |
Silicon dioxide incorporated cellulose acetate?mixed matrix membranes for Safranin-O removal from aqueous solutions |
| 2024-10-30 |
Second-generation biorefineries: single platform for the conversion of lignocellulosic wastes to environmentally important biofuels |
| 2024-10-30 |
Evaluation of polylactic acid polymer composites strengthened with chopped vetiver fiber and pearl millet-derived- nano silica towards environmental sustainability |
| 2024-10-30 |
Solid?phase synthesis of grafted carbon black for superior aging resistance in biodegradable poly(butylene adipate?co?butylene terephthalate) composite films |
| 2024-10-30 |
Deciphering Biosynthesis Mechanism and Solution Properties of Cyclic Amylopectin |
| 2024-10-30 |
Influence of Chemical, Morphological, Spectroscopic and Calorimetric Properties of Agroindustrial Cellulose Wastes on Drainage Behavior in Stone Mastic Asphalt Mixtures |
| 2024-10-29 |
Enhanced Impact Resistance, Oxygen Barrier, and Thermal Dimensional Stability of Biaxially Processed Miscible Poly(Lactic Acid)/Poly(Butylene Succinate) Thin Films |
| 2024-10-29 |
Advanced Flexible Wearable Electronics from Hybrid Nanocomposites Based on Cellulose Nanofibers, PEDOT:PSS and Reduced Graphene Oxide |
| 2024-10-29 |
Highly Porous 3D Nanofibrous Scaffold of Polylactic Acid/Polyethylene Glycol/Calcium Phosphate for Bone Regeneration by a Two-Step Solution Blow Spinning (SBS) Facile Route |
| 2024-10-29 |
Key Advances in Solution Blow Spinning of Polylactic-Acid-Based Materials: A Prospective Study on Uses and Future Applications |
| 2024-10-29 |
3D Printable Alginate–Chitosan Hydrogel Loaded With Ketoconazole Exhibits Anticryptococcal Activity |
| 2024-10-28 |
Cellulose nanocrystals from tucum fibers cultivated in Amazon Forest: extraction and characterization |
| 2024-10-28 |
Bio-Based and Biodegradable Polymeric Materials for a Circular Economy |
| 2024-10-28 |
A Sustainable and Eco-Friendly Membrane for PEM Fuel Cells Using Bacterial Cellulose |
| 2024-10-28 |
Wear and Dynamic Mechanical Analysis (DMA) of Samples Produced via Fused Deposition Modelling (FDM) 3D Printing Method |
| 2024-10-28 |
Preparation and Characterization of Cellulose/Silk Fibroin Composite Microparticles for Drug-Controlled Release Applications |
| 2024-10-28 |
Impact of Carbon Source on Bacterial Cellulose Network Architecture and Prolonged Lidocaine Release |
| 2024-10-28 |
Sources and Methods for the Production of Xyloglucan, a Promising Stimulus-Sensitive Biopolymer: A Review |
| 2024-10-28 |
Mechanical and Thermal Characteristics of Films from Glycerol Mixed Emulsified Carnauba Wax/Polyvinyl Alcohol |
| 2024-10-28 |
Pervaporation chitosan membranes modified with carbon nanoparticles for enhanced isopropanol dehydration |
| 2024-10-28 |
Synthesis and characterization of novel electrospun nanofibers based on taro starch: influence of solvent and isolation agent on morphology and diameter |
| 2024-10-28 |
Adsorption of amoxicillin by chitosan and alginate biopolymers composite beads |
| 2024-10-28 |
Novel Degradable Superabsorbent Polymers Based on Carboxymethyl Cellulose |
| 2024-10-27 |
Synthesis and Evaluation of Starch-Grafted-Poly[(Acrylic Acid)-Co-Acrylamide] Based Nanoclay Polymer Composite Fertilizers for Slow Release of Nitrogen in Soil |
| 2024-10-27 |
Radical Copolymerization of 2?Thiocyanatoethyl Substituted Acrylate to Introduce Thiol?Acrylate?Based Dynamic Bonds as Degradable Linker |
| 2024-10-27 |
In Vitro Inhibitory Mechanism of Polyphenol Extracts from Multi-Frequency Power Ultrasound-Pretreated Rose Flower Against α-Glucosidase |
| 2024-10-27 |
Effects of fluorination of benzothiadiazole units on the properties of alternating cyclopentadithiophene/benzothiadiazole donor/acceptor polymers |
| 2024-10-26 |
A facile method for carbon nanotube/carbon fiber?reinforced polylactic acid composites |
| 2024-10-26 |
A preliminary evaluation of bing cherry tree (prunus avium L.) pruning waste as an alternative lignocellulosic filler for lightweight composite material applications |
| 2024-10-26 |
Tailored and sustainable bio-composite thanks to synergetic interactions of polycaprolactone (PCL) and guar gum derivative |
| 2024-10-26 |
Rifampicin-Loaded PLGA/Alginate-Grafted pNVCL-Based Nanoparticles for Wound Healing |
| 2024-10-25 |
Leveraging Spruce Bark Particle Morphology for Enhanced Internal Bonding in Particleboard Production |
| 2024-10-25 |
Dual Antimicrobial Activity of HTCC and Its Nanoparticles: A Synergistic Approach for Antibacterial and Antiviral Applications Through Combined In Silico and In Vitro Studies |
| 2024-10-25 |
Isolation and Characterization of Novel Cellulose Micro/Nanofibers from Lygeum spartum Through a Chemo-Mechanical Process |
| 2024-10-25 |
Closed-Loop Recycling of 3D-Printed Wood–PLA Composite Parts: Effects on Mechanical and Structural Properties via Fused Filament Fabrication |
| 2024-10-25 |
Air?Processed Efficient Perovskite Solar Cells With Full Lifecycle Management |
| 2024-10-25 |
A promising pullulan/PLA composite: Influence of pullulan in the scaffolds morphology constructed by 3D printing |
| 2024-10-25 |
Thinking Green on 3D Printing: Sustainable Polymer Compositions of Post-Consumer Polypropylene and Tire Rubber Crumbs Intended for Industrial Applications |
| 2024-10-25 |
Notch Effect in Acrylonitrile Styrene Acrylate (ASA) Single-Edge-Notch Bending Specimens Manufactured by Fused Filament Fabrication |
| 2024-10-25 |
Synthesis of Rare Earth Metal Complexes Stabilized by Amine Bridged Bis(phenolato) Ligands and Their Performance in the Polymerization of rac???Butyrolactone |
| 2024-10-24 |
Development of Polymer Composites Using Surface-Modified Olive Pit Powder for Fused Granular Fabrication |
| 2024-10-24 |
Environmentally Benign High?Performance Composites?Based Hybrid Microcrystalline Cellulose/Graphene Oxide |
| 2024-10-24 |
The Evaluation of Sandwich Composite Materials with Vegetable Fibers in a Castor Oil Polyurethane Matrix with Their Faces and Honeycomb Core Made in a 3D Printer |
| 2024-10-24 |
Temperature-Responsive Injectable Composite Hydrogels Based on Poly(N-Isopropylacrylamide), Chitosan, and Hemp-Derived Cellulose Nanocrystals |
| 2024-10-24 |
Poly(lactide)-Based Materials Modified with Biomolecules: A Review |
| 2024-10-24 |
Electrospun Fibers of Ecovio® Polymer Blends with Antimicrobial Tea Tree Essential Oil: Enhanced Chemical and Biological Properties |
| 2024-10-24 |
Microparticles Decorated with Cell?Instructive Surface Chemistries Actively Promote Wound Healing |
| 2024-10-24 |
Effect of ??nucleating agents on structure and mechanical properties of dynamic crosslinked ethylene?octene random copolymer/polypropylene and ethylene?octene block copolymer/polypropylene blends |
| 2024-10-24 |
BODIPY-based nanoparticles for highly efficient photothermal/gas synergistic therapy against drug-resistant bacterial infection |
| 2024-10-24 |
Research on the Preparation of Dry Mixed Mortar Using Waste Incineration Fly Ash |
| 2024-10-24 |
Mini Review: Challenges and Promising Advances in Hydrogel?Based Scaffolds for Breast Tissue Regeneration |
| 2024-10-23 |
Grafting of Lactic Acid and ε-Caprolactone onto Alpha-Cellulose and Sugarcane Bagasse Cellulose: Evaluation of Mechanical Properties in Polylactic Acid Composites |
| 2024-10-23 |
Plasmonic Supramolecular Nanozyme?Based Bio?Cockleburs for Synergistic Therapy of Infected Diabetic Wounds |
| 2024-10-23 |
Mathematical Modelling of Tensile Mechanical Behavior of a Bio-Composite Based on Polybutylene-Succinate and Brewer Spent Grains |
| 2024-10-23 |
Influence of Oligomeric Lactic Acid and Structural Design on Biodegradation and Absorption of PLA-PHB Blends for Tissue Engineering |
| 2024-10-23 |
Electrospun Cellulose Acetate/Poly(Vinyl Alcohol) Nanofibers Loaded with Methyl Gallate and Gallic Acid for Anti-Staphylococcus aureus Applications |
| 2024-10-23 |
Pyrazine substituted chitosan: an adsorbent material for the efficient removal of anionic dyes from aqueous solutions |
| 2024-10-23 |
Tailoring the Mechanical Properties and Foaming Behaviors of PLA/P4HB Blends by Using P4HB?g?GMA as Compatibilizer |
| 2024-10-23 |
Electrochemical synthesis, physical properties and corrosion behavior of electropolymerized polyaniline films developed on 316L stainless steel |
| 2024-10-23 |
Synthesis of reaction promoters for epoxy polymerization: Enhancing storage stability and mechanical properties of one?pot epoxy systems |
| 2024-10-23 |
Magnesium-Titanium Alloys: A Promising Solution for Biodegradable Biomedical Implants |
| 2024-10-22 |
Analysis of Geometrical Accuracy and Surface Quality of Threaded and Spline Connections Manufactured Using MEX, MJ and VAT Additive Technologies |
| 2024-10-22 |
Electrospun Nanofiber Dopped with TiO2 and Carbon Quantum Dots for the Photocatalytic Degradation of Antibiotics |
| 2024-10-22 |
An oxidative depolymerized lignin treated by potassium ferrate and its use in preparation of epoxy resin |
| 2024-10-22 |
Diphenylphosphine oxide derivative with a symmetrical structure as an efficient flame retardant for application in epoxy resin |
| 2024-10-21 |
Comparative study on the thermal and tribological properties of PA12 and PA11 for coating applications |
| 2024-10-21 |
Chemical and Resistive Switching Properties of Elaeodendron buchananii Extract–Carboxymethyl Cellulose Composite: A Potential Active Layer for Biodegradable Memory Devices |
| 2024-10-21 |
Polymer-Modified Fertilizers for Mitigating Strawberry Root Burn |
| 2024-10-21 |
Evaluation of the excellent adsorption performance for lead ions of (sodium alginate/ waste para-aramid)-based polymer composite functionalized by ethylene diamine tetra (methylene phosphonic acid) |
| 2024-10-21 |
Enhanced piezoelectric and electrodeformation properties of PVDF films fabricated by roll to roll process |
| 2024-10-21 |
Free?radical emulsion copolymerization of styrene/1?hexene in an autoclave: Synthesis and property evaluation |
| 2024-10-21 |
A Novel Approach to the Development of Natural Resin?Based Biopolymer in the Presence of a Reusable Catalyst: Characterization and Modeling of Material Properties |
| 2024-10-21 |
Electrically Conductive Lignin Reinforced Polyacrylic Acid/Hyaluronic Acid Scaffolds With PEDOT:HA Nanoparticles |
| 2024-10-20 |
Silver-Doped Reduced Graphene Oxide/PANI-DBSA-PLA Composite 3D-Printed Supercapacitors |
| 2024-10-20 |
Cutting-Edge Applications of Cellulose-Based Membranes in Drug and Organic Contaminant Removal: Recent Advances and Innovations |
| 2024-10-20 |
Covalent Pectin/Arabinoxylan Hydrogels: Rheological and Microstructural Characterization |
| 2024-10-20 |
Biodegradation Study of Food Packaging Materials: Assessment of the Impact of the Use of Different Biopolymers and Soil Characteristics |
| 2024-10-20 |
Preparation and Performance of PBAT/PLA/CaCO3 Composites via Solid-State Shear Milling Technology |
| 2024-10-19 |
Effect of Material Extrusion Process Parameters to Enhance Water Vapour Adsorption Capacity of PLA/Wood Composite Printed Parts |
| 2024-10-19 |
Comparative study of blending techniques in polylactic acid/cellulose nanofibrils green composites for benchtop 3D printing filaments |
| 2024-10-19 |
Efficient Extraction and Analysis of Wheat Straw Lignin by Response Surface Methodology |
| 2024-10-19 |
Heterochain entanglements forced by shear forces and their influence on the properties of polylactic acid/hydrogenated styrene?ethylene?butylene?styrene tri?block copolymers blends |
| 2024-10-18 |
PVA/PEGDA microgels loaded with L-cysteine for corrosion inhibition coating on fragile bronze |
| 2024-10-18 |
Preparation of Polyvinyl Alcohol–Chitosan Nanocellulose–Biochar Nanosilver Composite Hydrogel and Its Antibacterial Property and Dye Removal Capacity |
| 2024-10-18 |
Optimized Machine Learning Model for Predicting Compressive Strength of Alkali-Activated Concrete Through Multi-Faceted Comparative Analysis |
| 2024-10-18 |
Exploring the Possibilities of Using Recovered Collagen for Contaminants Removal—A Sustainable Approach for Wastewater Treatment |
| 2024-10-18 |
Application of Biomass-Based Triboelectrification for Particulate Matter Removal |
| 2024-10-18 |
Polyurethane nanocomposites from 4?bromo?1H?pyrazole?blocked?diisocyanates |
| 2024-10-17 |
4D Printing of PLA/PBS Biopolymers: Impact of Polymer Grade Variations on Thermomechanical Performance |
| 2024-10-17 |
Application, Progress, and Trend of Thickened Acid Fracturing in Carbonate Rock Reservoir Development |
| 2024-10-17 |
Study of Mechanical and Thermal Properties of Environmentally Friendly Composites from Beer Bagasse |
| 2024-10-17 |
Sublingual Fast-Dissolving Thin Films of Loratadine: Characterization, In Vitro and Ex Vivo Evaluation |
| 2024-10-17 |
An Updated Review Summarizing the Anticancer Potential of Poly(Lactic?co?Glycolic Acid) (PLGA) Based Curcumin, Epigallocatechin Gallate, and Resveratrol Nanocarriers |
| 2024-10-17 |
Plasma Functionalization for Enhanced Natural Dye Affinity on Bioplastics: A Novel Approach |
| 2024-10-17 |
In?situ fabrication of poly?l?lactide & its application as a glass fiber polymer composites using resin transfer molding |
| 2024-10-17 |
Preparation, characterization, and antibacterial evaluation of novel biodegradable self?healing film based on fish collagen cross?linked carboxymethyl cellulose |
| 2024-10-16 |
In Vivo Study of the Effect of Sugarcane Bagasse Lignin Supplementation on Broiler Chicken Diet as a Step to Validate the Established Chicken Gastrointestinal Tract In Vitro Model |
| 2024-10-16 |
Sustainable Starch-Based Films from Cereals and Tubers: A Comparative Study on Cherry Tomato Preservation |
| 2024-10-16 |
Preparation of Lyocell Fibers from Solutions of Miscanthus Cellulose |
| 2024-10-16 |
Impact of cellulose enrichment on castor oil polyurethane sheets: A path to greener materials |
| 2024-10-16 |
Waterborne novolac epoxy?based thermal resistant and fire?retardant thermal insulation coatings |
| 2024-10-16 |
Pesticide delivery microcapsule based on maleic anhydride?functionalized cellulose nanocrystals?stabilized pickering emulsion |
| 2024-10-16 |
Toward a green economy: Lignin-based hybrid materials as functional additives in flame-retardant polymer coatings |
| 2024-10-16 |
The Utilization of Central Composite Design for the Production of Hydrogel Blends for 3D Printing |
| 2024-10-16 |
Comparison of the Stability of a Camu Camu Extract Dried and Encapsulated by Means of High-Throughput Electrospraying Assisted by Pressurized Gas |
| 2024-10-16 |
Targeted PHA Microsphere-Loaded Triple-Drug System with Sustained Drug Release for Synergistic Chemotherapy and Gene Therapy |
| 2024-10-16 |
Adjustment of temperature sensitivity using hydrophilic materials to develop superabsorbent polymers based on poly(N?isopropyl acrylamide) as a temperature?sensitive material |
| 2024-10-16 |
Ring?opening copolymerization of ??caprolactone and ??valerolactone to cyclic polyesters by a bimolecular system |
| 2024-10-15 |
Multi?branched octopus?like plasticizers with excellent plasticizing performance in poly(vinyl chloride) |
| 2024-10-15 |
High-Performance Dual-Redox-Mediator Supercapacitors Based on Buckypaper Electrodes and Hydrogel Polymer Electrolytes |
| 2024-10-15 |
CNCs and CeO2 as organic–inorganic additives to enhance HPC bio-polymer wood coatings against photochemical degradation |
| 2024-10-15 |
Super tough, electrochemical stability and puncture resistant electrolyte for lithium?metal batteries |
| 2024-10-15 |
Melt?functionalization of cellulose nanocrystals using dynamic hindered ureas |
| 2024-10-15 |
The Development of a Flexible Humidity Sensor Using MWCNT/PVA Thin Films |
| 2024-10-15 |
Green polymer?based materials as promising therapeutical agents for non?communicable diseases |
| 2024-10-15 |
On the Architecture of Starch Granules Revealed by Iodine Binding and Lintnerization. Part 2: Molecular Structure of Lintnerized Starches |
| 2024-10-15 |
CFD Simulation of Mixing Forest Biomass to Obtain Cellulose |
| 2024-10-14 |
Gradient Functionalization of Poly(lactic acid)-Based Materials with Polylysine for Spatially Controlled Cell Adhesion |
| 2024-10-14 |
An Easy-to-Handle Route for Bicomponent Porous Tubes Fabrication as Nerve Guide Conduits |
| 2024-10-14 |
Charge Mediated Changes to the Intrinsic Viscosity of Biopolymer Systems |
| 2024-10-14 |
Investigation of structural and optical characteristics of PVA/crystal violet dye composites for flexible smart optoelectronic applications |
| 2024-10-13 |
Strategy and Advancement in Hybrid Hydrogel and Their Applications: Recent Progress and Trends |
| 2024-10-12 |
Surface treatment effects on morphological and property enhancements of poly (3?hydroxybutyrate?co?3?hydroxyvalerate)/Diss fibers (Ampelodesmos mauritanicus) biocomposites |
| 2024-10-12 |
Formulation-Property Effects in Novel Injectable and Resilient Natural Polymer-Based Hydrogels for Soft Tissue Regeneration |
| 2024-10-12 |
Advancements in Polymer Biomaterials as Scaffolds for Corneal Endothelium Tissue Engineering |
| 2024-10-12 |
Source, Extraction, Properties, and Multifunctional Applications of Pectin: A Short Review |
| 2024-10-12 |
Effect of shear rate, temperature, and salts on the viscosity and viscoelasticity of semi?dilute and entangled xanthan gum |
| 2024-10-12 |
Hydrophobic association hydrogel with toughness, high stretch, and sensitivity for flexible sensing |
| 2024-10-11 |
Development of Fiber-Reinforced Polymer Composites for Additive Manufacturing and Multi-Material Structures in Sustainable Applications |
| 2024-10-11 |
Thermal Properties of Seed Cake Biomasses and Their Valorisation by Torrefaction |
| 2024-10-11 |
Dynamic Light Scattering Microrheology of Phase-Separated Poly(vinyl) Alcohol–Phytagel Blends |
| 2024-10-11 |
Fabrication and Properties of Hydrogel Dressings Based on Genipin Crosslinked Chondroitin Sulfate and Chitosan |
| 2024-10-10 |
Characterization of PLA/LW-PLA Composite Materials Manufactured by Dual-Nozzle FDM 3D-Printing Processes |
| 2024-10-10 |
Advances in Electrospun Poly(ε-caprolactone)-Based Nanofibrous Scaffolds for Tissue Engineering |
| 2024-10-10 |
Microbial Polysaccharides as Functional Components of Packaging and Drug Delivery Applications |
| 2024-10-10 |
Polypropylene Crystallinity Reduction through the Synergistic Effects of Cellulose and Silica Formed via Sol–Gel Synthesis |
| 2024-10-10 |
Chitin Extracted from Black Soldier Fly Larvae at Different Growth Stages |
| 2024-10-10 |
Fused Filament Fabrication 3D Printing Parameters Affecting the Translucency of Polylactic Acid Parts |
| 2024-10-10 |
Avocado Seed Starch-Based Films Reinforced with Starch Nanocrystals |
| 2024-10-10 |
Towards Photocrosslinkable Lyotropic Blends of Organosolv Lignin and Hydroxypropyl Cellulose for 3D Printing by Direct Ink Writing |
| 2024-10-10 |
Biomineralization Process Inspired In Situ Growth of Calcium Carbonate Nanocrystals in Chitosan Hydrogels |
| 2024-10-10 |
Investigation into the Liquid Absorption Performance of MSNs@CTS-g-P(AA-co-AM) Absorbent Resin |
| 2024-10-10 |
Morphology and Physical-Chemical Properties of Composite Materials Based on Polyolefins and Chitosan |
| 2024-10-10 |
Biodegradation Studies of Biobased Mulch Films Reinforced with Cellulose from Waste Mango |
| 2024-10-10 |
Endowed Polyphenols in Advanced Delivery Systems for Vaginal Infections |
| 2024-10-10 |
An Investigation of Oxides of Tantalum Produced by Pulsed Laser Ablation and Continuous Wave Laser Heating |
| 2024-10-09 |
Mechanical Performance of Cellulose Nanocrystal and Bioceramic-Based Composites for Surgical Training |
| 2024-10-09 |
Performance of Bamboo Bark Fiber Asphalt Mortar Modified with Surface-Grafted Nano-SiO2 |
| 2024-10-09 |
An integrated approach for plastic polymer degradation by the gut bacterial resident of superworm, Zophobas morio (Coleoptera:Tenebrionidae) |
| 2024-10-09 |
Development of a Human Recombinant Collagen for Vat Polymerization?Based Bioprinting |
| 2024-10-09 |
Porosity Regulation of Surfactant?Assisted Glycerol Organosolv Lignin Modified Hyper?Cross?Linked Polymers and Their Efficient Adsorption for Dyes From Water |
| 2024-10-08 |
Preparation and Characterization of Novel Poly(Lactic Acid) Composites Reinforced with “Latxa” Sheep Wool Fibers: The Effect of Peroxide Surface Treatments and Fiber Content |
| 2024-10-07 |
Efficacy of Acacia Gum Biopolymer in Strength Improvement of Silty and Clay Soils under Varying Curing Conditions |
| 2024-10-07 |
Evaluating the Effectiveness of Cellulose-Based Surfactants in Expandable Graphite Wood Coatings |
| 2024-10-07 |
Stabilization of Picea abies Spruce Bark Extracts within Ice-Templated Porous Dextran Hydrogels |
| 2024-10-07 |
Fabrication of thermo?responsive polymer?MOF@cellulase composites with improved catlytic performance for hydrolysis of cellulose |
| 2024-10-07 |
Investigation of mixed matrix membranes of graphene and acid?treated graphene fillers in cellulose acetate and polyetherimide polymers for CO2 separation from biogas |
| 2024-10-06 |
Using the Herschel–Bulkley Consistency Index to Characterise Complex Biopolymer Systems—The Effect of Screening |
| 2024-10-06 |
Comparison of Biowaste Fillers Extracted from Fish Scales and Collagen on the Mechanical Properties of High-Density Polyurethane Foams |
| 2024-10-06 |
Applications of Plant Essential Oils in Pest Control and Their Encapsulation for Controlled Release: A Review |
| 2024-10-06 |
Incorporation of Capecitabine Into Extended Chain of N?Acylated Chitosan Carrier |
| 2024-10-05 |
Methylene Blue Solid Alginate Gels for Photodynamic Therapy: The Peculiarities of Production and Controlled Release of the Dye |
| 2024-10-05 |
Improvement of Mechanical Properties of 3D Bioprinted Structures through Cellular Overgrowth |
| 2024-10-04 |
A Review of Natural Fibres and Biopolymer Composites: Progress, Limitations, and Enhancement Strategies |
| 2024-10-04 |
In Vitro Evaluation of Electrospun PCL Bioscaffold with Zinc-Doped Bioactive Glass Powder Addition |
| 2024-10-04 |
Facile Construction of Flame-Resistant and Thermal-Insulating Sodium Alginate Aerogel Incorporating N- and P-Elements |
| 2024-10-04 |
A Thermosensitive and Degradable Chitin-Based Hydrogel as a Brucellosis Vaccine Adjuvant |
| 2024-10-03 |
Melt-Processed Polybutylene-Succinate Biocomposites with Chitosan: Development and Characterization of Rheological, Thermal, Mechanical and Antimicrobial Properties |
| 2024-10-03 |
Mahua oil cake microcellulose as a performance enhancer in flax fiber composites: Mechanical strength and sound absorption analysis |
| 2024-10-03 |
Blue Laser for Production of Carbon Dots |
| 2024-10-03 |
Insights on Microplastic Contamination from Municipal and Textile Industry Effluents and Their Removal Using a Cellulose-Based Approach |
| 2024-10-03 |
Magnetic Nanoparticles in Biopolymer Fibers: Fabrication Techniques and Characterization Methods |
| 2024-10-02 |
Flour Treatments Affect Gluten Protein Extractability, Secondary Structure, and Antibody Reactivity |
| 2024-10-01 |
Functional Silsesquioxanes—Tailoring Hydrophobicity and Anti-Ice Properties of Polylactide in 3D Printing Applications |
| 2024-10-01 |
Modifying Cassava Starch via Extrusion with Phosphate, Erythorbate and Nitrite: Phosphorylation, Hydrolysis and Plasticization |
| 2024-10-01 |
Water Repellent Coating in Textile, Paper and Bioplastic Polymers: A Comprehensive Review |
| 2024-10-01 |
Isolation and Structural Characterization of Natural Deep Eutectic Solvent Lignin from Brewer’s Spent Grains |
| 2024-10-01 |
Fluorescent Nanocomposites of Cadmium Sulfide Quantum Dots and Polymer Matrices: Synthesis, Characterization, and Sensing Application |
| 2024-10-01 |
Polyhydroxybutyrate/poly(??caprolactone)?based electrospun membranes loaded with amoxicillin?potassium clavulanate halloysite nanotubes for biomedical applications |
| 2024-10-01 |
Enhancing foamability and flame?retardancy of polylactic acid bead foams through inter?beads bulk polymerization and continuous phase dispersion of LDHs |
| 2024-09-30 |
Evaluation of Additives on the Cell Metabolic Activity of New PHB/PLA-Based Formulations by Means of Material Extrusion 3D Printing for Scaffold Applications |
| 2024-09-30 |
Dual-Responsive Alginate/PNIPAM Microspheres Fabricated by Microemulsion-Based Electrospray |
| 2024-09-30 |
Recycling Technologies for Biopolymers: Current Challenges and Future Directions |
| 2024-09-30 |
The Influence of Printing Speed and Temperature on the Mechanical, Absorptive, and Morphological Properties of PLA-Based Hybrid Materials Produced with an FDM-Type 3D Printer |
| 2024-09-30 |
Strategic Use of Vegetable Oil for Mass Production of 5-Hydroxyvalerate-Containing Polyhydroxyalkanoate from δ-Valerolactone by Engineered Cupriavidus necator |
| 2024-09-30 |
The Correlations between the Microstructures and Color Properties of Nanocrystalline Cellulose: A Concise Review |
| 2024-09-30 |
Modelling across Multiple Scales to Design Biopolymer Membranes for Sustainable Gas Separations: 2-Multiscale Approach |
| 2024-09-30 |
Chitosan-Zinc-Ligated Hydroxychloroquine: Molecular Docking, Synthesis, Characterization, and Trypanocidal Activity against Trypanosoma evansi |
| 2024-09-30 |
Valorization of Cellulosic Waste from Artichoke for Incorporation into Biodegradable Polylactic Acid Matrices |
| 2024-09-30 |
Valorisation of Blackcurrant Pomace by Extraction of Pectin-Rich Fractions: Structural Characterization and Evaluation as Multifunctional Cosmetic Ingredient |
| 2024-09-30 |
Innovative Poly(Lactic Acid) Blends: Exploring the Impact of the Diverse Chemical Architectures from Itaconic Acid |
| 2024-09-30 |
Exploring the Potential of Pectin as a Source of Biopolymers for Active and Intelligent Packaging: A Review |
| 2024-09-30 |
Enhanced Cellulose Extraction from Banana Pseudostem Waste: A Comparative Analysis Using Chemical Methods Assisted by Conventional and Focused Ultrasound |
| 2024-09-30 |
Biodegradable composites from poly(butylene adipate?co?terephthalate) with soybean protein isolate: Preparation, characterization, and performances |
| 2024-09-30 |
Conjugated electrospinning toward a polycaprolactone scaffold simultaneously containing micro-/nano- fibers for potential biomedical application |
| 2024-09-30 |
Characterization of a Novel Acid-Stable Chitosanase from Lentinula edodes Suitable for Chitooligosaccharide Preparation |
| 2024-09-29 |
Features of Polymer Modification in a Supercritical Carbon Dioxide Environment |
| 2024-09-29 |
Chemically Degradable Vitrimers Based on Divanillin Imine Diepoxy Monomer and Aliphatic Diamines for Enhanced Carbon Fiber Composite Applications |
| 2024-09-29 |
Polyvinyl Alcohol (PVA)-Based Hydrogels: Recent Progress in Fabrication, Properties, and Multifunctional Applications |
| 2024-09-29 |
Ethoxy Acetalated Dextran-Based Biomaterials for Therapeutic Applications |
| 2024-09-29 |
Development of Poly(lactic acid)-Based Biocomposites with Silver Nanoparticles and Investigation of Their Characteristics |
| 2024-09-29 |
Photoinduced On and Off Polymeric Room Temperature Phosphorescence Based On Polycyclic Aromatic Hydrocarbon Isomers |
| 2024-09-29 |
Modern Technologies for Creating Powdered Cellulose and Nanocellulose Composites |
| 2024-09-28 |
Alginate Spheres: Influence of Agar and Xanthan Gum Incorporation on Membrane Stability and Permeability |
| 2024-09-28 |
Colloidal Characteristics of Poly(L-Lactic Acid)-b-Poly (ε-Caprolactone) Block Copolymer-Based Nanoparticles Obtained by an Emulsification/Evaporation Method |
| 2024-09-28 |
Encapsulation of Bacillus subtilis in Electrospun Poly(3-hydroxybutyrate) Fibers Coated with Cellulose Derivatives for Sustainable Agricultural Applications |
| 2024-09-28 |
Deep eutectic solvent and poly (vinyl alcohol) based eutectogels: Characterization and properties |
| 2024-09-28 |
Synergism of lithium acetate salt toward surface chemistry and physical properties of carboxymethyl chitosan?based solid polymer electrolyte |
| 2024-09-28 |
Application of Active Packaging Films for Extending the Shelf Life of Red Meats: A Review |
| 2024-09-27 |
Copper Nanoparticle Loaded Electrospun Patches for Infected Wound Treatment: From Development to In-Vivo Application |
| 2024-09-27 |
Bacterial Cellulose Production within a Circular Economy Framework: Utilizing Organic Waste |
| 2024-09-27 |
Preparations of Polyurethane Foam Composite (PUFC) Pads Containing Micro-/Nano-Crystalline Cellulose (MCC/NCC) toward the Chemical Mechanical Polishing Process |
| 2024-09-27 |
Mechanical and Biological Characterization of Ionic and Photo-Crosslinking Effects on Gelatin-Based Hydrogel for Cartilage Tissue Engineering Applications |
| 2024-09-27 |
Novel Carbohydrate Polymer?Based Systems for Precise Drug Delivery in Colon Cancer: Improving Treatment Effectiveness With Intelligent Biodegradable Materials |
| 2024-09-26 |
Modeling and Experimental Validation of Cell Morphology in Microcellular-Foamed Polycaprolactone |
| 2024-09-25 |
Investigating the Influence of Additive Manufacturing and Ultrasonic Coating Parameters on Biopolymeric Scaffold Performance Using Response Surface Methodology |
| 2024-09-25 |
Utilization of Forest Residues for Cellulose Extraction from Timber Species in the High Montane Forest of Chimborazo, Ecuador |
| 2024-09-25 |
Delamination and Evaluation of Multilayer PE/Al/PET Packaging Waste Separated Using a Hydrophobic Deep Eutectic Solvent |
| 2024-09-25 |
Dual drug co?encapsulation of bevacizumab and pemetrexed clocked polymeric nanoparticles improves antiproliferative activity and apoptosis induction in liver cancer cells |
| 2024-09-25 |
Integrating the in vitro antioxidant activity of Polyacrylonitrile/Polyindole composites |
| 2024-09-24 |
Catechin as a functional additive in electrospun PCL/gelatin/nHA nanocomposite fibers for tissue engineering applications |
| 2024-09-24 |
A modified microscale viscosity model of polymer melts and experimental verification |
| 2024-09-24 |
Controlled localization of graphene oxide to improve barrier, biodegradation and mechanical properties of PBAT/EVOH |
| 2024-09-24 |
Synthesis and properties of biomass?based polymethacrylate comprising chitin?derived 2?acetamide?2?deoxyisosorbide as a repeat unit |
| 2024-09-24 |
Evaluating the Use of Predicted Cushion Curves for Comparing the Performance of Some Sustainable Cushion Systems |
| 2024-09-24 |
pH?responsive bionanocomposite pectin grafted with dimethylaminoethyl methacrylate and acrylic acid copolymer along with silver nanoparticles for breast cancer drug delivery |
| 2024-09-24 |
A Review of Chitosan as a Coagulant of Health-Related Microorganisms in Water and Wastewater |
| 2024-09-23 |
Optimizing locally delivered periodontitis therapy: Development of chitosan?hydroxyapatite?encapsulated drug via electrospraying |
| 2024-09-23 |
Enhanced chitosan and Carboxymethylcellulose scaffolds with natural fiber reinforcement for hernia repair meshes |
| 2024-09-23 |
Dynamic electromechanical characterizations of poly(vinylidene fluoride) based nanocomposite films on ultra?low modulus polymer substrate |
| 2024-09-22 |
Hierarchical Interfacial Construction by Grafting Cellulose Nanocrystals onto Carbon Fiber for Improving the Mechanical Performance of Epoxy Composites |
| 2024-09-21 |
In Situ Modification of Alginate Fibers by Nano-montmorillonite for Enhancing the Mechanical Properties |
| 2024-09-21 |
Enhancement of flame retardancy in ceramic polymer composite materials with ammonium polyphosphate/melamine cyanurate |
| 2024-09-21 |
Development of high?performance EGMA/EVA?bamboo powder composite foams with enhanced stability, strengthening and toughening for sustainable applications |
| 2024-09-20 |
A sustainable hybrid strengthening/stiffening approach for injection molded polypropylene matrix thermoplastic composites |
| 2024-09-20 |
Polyacetylene Prepared by Chemical Dehydration of Poly(Vinyl Alcohol) |
| 2024-09-20 |
Rheological properties of carboxymethyl cellulose–fucoidan mixture: effect of fucoidan concentration and salt |
| 2024-09-18 |
The Ultimate Fate of Reactive Dyes Absorbed onto Polymer Beads: Feasibility and Optimization of Sorbent Bio-Regeneration under Alternated Anaerobic–Aerobic Phases |
| 2024-09-18 |
Natural polymers for emerging technological applications: cellulose, lignin, shellac and silk |
| 2024-09-18 |
A study of crashworthiness performance in thin?walled multi?cell tubes 3D?printed from different polymers |
| 2024-09-18 |
Modern Insulation Materials for Sustainability Based on Natural Fibers: Experimental Characterization of Thermal Properties |
| 2024-09-17 |
Tailoring N, N, N?trimethyl chitosan nanospheres as an efficient drug carrier to overcome endothelial barrier |
| 2024-09-16 |
Exploring the fabrication of temperature-regulated spray-bonded cotton using eutectic dual-network phase transition microspheres |
| 2024-09-13 |
Perspectives on Plastic Waste Management: Challenges and Possible Solutions to Ensure Its Sustainable Use |
| 2024-09-12 |
Discarded bamboo chopstick cellulose-based fibers for bio-based polybutylene succinate composite reinforcement |
| 2024-09-12 |
An Advanced Surface Treatment Technique for Coating Three-Dimensional-Printed Polyamide 12 by Hydroxyapatite |
| 2024-09-12 |
PLA/CB and HDPE/CB conductive polymer composites: Effect of polymer matrix structure on the rheological and electrical percolation threshold |
| 2024-09-11 |
Effect of Tetrapropylammonium Chloride Quaternary Ammonium Salt on Characterization, Cytotoxicity, and Antibacterial Properties of PLA/PEG Electrospun Mat |
| 2024-09-09 |
Use of modified chitosan as bitumen modifier and its impact on rheological properties in bitumen modification |
| 2024-09-09 |
Effects of graphene oxide and silane?grafted graphene oxide on chitosan packaging nanocomposite films for bread preservation |
| 2024-09-08 |
Ligand?directed assembly of multimetallic aluminum complexes: Synthesis, Structure and ROP catalysis |
| 2024-09-08 |
New porous adsorbents based on natural polymers for treatment of motor oil contaminated wastewaters |
| 2024-09-05 |
Asymmetric Kinetic Resolution Polymerization of Racemic Lactide Mediated by Axial?Chiral Thiourea/Phosphazene Binary Organocatalyst |
| 2024-09-03 |
Investigation of synergistic effects of polyols and cellulose?based reinforcements on kappa?carrageenan films |
| 2024-09-03 |
Enhancing Mechanical and Thermal Properties of Epoxy Composites with Fish Scale?Derived Collagen Reinforcement |
| 2024-09-03 |
Bleaching Scutched Flax Tow (SFT) With Ozone Process in Low Water Environment: Evaluation of Fiber Physicochemical Properties and Bleaching Performance |
| 2024-09-03 |
Fabrication of MIL-101(Fe)-embedded biopolymeric films and their biomedical applications |
| 2024-09-02 |
Laser?Induced Formation of Fine Porous Graphitic Carbon for Eco?Friendly Supercapacitors |
| 2024-09-02 |
Electro?Optically Configurable Synaptic Transistors With Cluster?Induced Photoactive Dielectric Layer for Visual Simulation and Biomotor Stimuli |
| 2024-09-02 |
Designing for Degradation: Transient Devices Enabled by (Nano)Cellulose |
| 2024-09-02 |
Design of Thermochromic Cotton Fabrics with Thermoregulation Behavior Through Application of Chitosan–Sodium Alginate/Cvl/1-Tetradecanol-Based Thermochromic Phase Change Microcapsules |
| 2024-09-02 |
Superhydrophilic?underwater superoleophobic polyvinyl alcohol membranes for oily water treatment |
| 2024-09-01 |
Diazinon removal from aqueous solution via grape branch-derived cellulose nanocrystals/polyethersulfone nanocomposite membrane: performance, characterization, and modeling |
| 2024-09-01 |
Chiral Acetal?Based Stereo?Controlled Degradable Polymer Synthesis |
| 2024-09-01 |
Analyzing the Biodegradation Susceptibility of Materials Based on Polylactic Acid |
| 2024-09-01 |
Composite Eco Materials Based on Polyesters for the Agro-Industrial Complex |
| 2024-09-01 |
Overcoming Chemical and Mechanical Instabilities in Lithium Metal Anodes with Sustainable and Eco?Friendly Artificial SEI Layer |
| 2024-08-29 |
Constructing Electronic/Ionic?Conductive Hydrogel with Soft Compliance and High Conductivity as Flexible Strain Sensor |
| 2024-08-29 |
A study of poly(pentaerythritol triallyl ether) embolic granules with medium swelling properties using for vascular embolizations against hepatocellar carcinoma |
| 2024-08-28 |
Antibacterial and antiviral activities of transparent PVA coating films prepared by using solutions containing eluted ions from rare earth iodates |
| 2024-08-27 |
Efficient chromium(VI) removal using trioctylmethylammonium salicylate as the carrier in polymer inclusion membranes |
| 2024-08-26 |
Investigating the effect of polymer additives on the rheology of SiC/clay paste for use in Direct Ink Writing method |
| 2024-08-24 |
Potential Valorization of Banana Production Waste in Developing Countries: Bio-Engineering Aspects |
| 2024-08-24 |
Effect of polymeric spherulite coatings on optical properties of chiral nematic cellulose nanocrystal films |
| 2024-08-19 |
Imparting of Nearly Superparamagnetic Properties to Cryogel Scaffolds With Mesoporous MNPs for Magneto?Sensitive Tissue Engineering Strategies |
| 2024-08-16 |
Crosslinked Chitosan-Sulfonated Polyphenylsulfone Electrospun Nanofibers: A Highly Water-Stable and Versatile Adsorbent for Organic Dye Removal |
| 2024-08-16 |
Improving the compatibility of polylactic acid/polycarbonate blends with nanoclay and Joncryl as chain extenders |
| 2024-08-16 |
Enhanced compatibility and toughness of poly(3?hydroxybutyrate?co?3?hydroxyvalerate)/polycaprolactone blends by ring?opening polymerization and hydrogen bonding of epoxy?terminated hyperbranched polyester |
| 2024-08-15 |
Research insight into the change of aggregation structure of BOPP films and its influence on electrical properties under accelerated thermal aging |
| 2024-08-15 |
The influence of the molecular structure of binary block?type styrene?butadiene rubber on dynamic mechanical properties under normal and high?pressure conditions |
| 2024-08-14 |
Substantial Improvement in Mechanical Properties and Anti?corrosion Properties of Rolled Zn–Mg–Sr Alloys as an Orthopedic Implant |
| 2024-08-14 |
Electrical Performance Enhancement of 400?V Level Aluminum Solid Electrolytic Capacitors with Interface Modulation through Intervention of PVA |
| 2024-08-14 |
Performance of novel engineered materials from nano?silica incorporated phenol?formaldehyde?flax fabric hybrid composite: Thermal, wear, aging and biodegradability analysis |
| 2024-08-14 |
Controlling Calcium Oxalate Crystal Growth Using Pectin and Sodium Alginate Natural Polymers |
| 2024-08-12 |
Optimization of Alkali Treatment Conditions of Ramie Fabrics Using Box–Behnken Method |
| 2024-08-09 |
Enhancing the flame retardancy of polycarbonate through the synergistic effect of 1,3?Benzenedisulfonate acid dipotassium salt and phenyl polysiloxanes |
| 2024-08-09 |
Transforming Commercial Polymers into Tough yet Switchable Adhesives by Trident Photoswitch Molecule Doping: Break Adhesion?Switchability Paradox |
| 2024-08-08 |
Biosynthesis of High Toughness Poly(3?Hydroxypropionate)?Based Block Copolymers With Poly(D?2?Hydroxybutyrate) and Poly(D?Lactate) Segments Using Evolved Monomer Sequence?Regulating Polyester Synthase |
| 2024-08-07 |
Impact of lignocellulosic nanofiber source on the performance of polylactic acid |
| 2024-08-07 |
Consequence of incorporation of MWCNTs on PVA hydrogel fabricated via naturally cooling: Thermal, mechanical, and electrical properties |
| 2024-08-07 |
Is poly(propylene carbonate) biodegradable? Synthesis of poly(propylene carbonate)?containing star and block copolymers and comprehensive investigation on their biodegradation |
| 2024-08-07 |
Performance evaluation of the nano-biodegradable drilling fluid using the greenly synthesized zinc nanorods and gundelia seed waste |
| 2024-08-06 |
Biopolymer and Biomimetic Techniques for Triboelectric Nanogenerators (TENGs) |
| 2024-07-12 |
Mechanochemical Solid-Phase Dissolution of Cellulose and Synthetic Polymers in N-Methylmorpholine N-oxide and Its Use in Fiber Spinning |
| 2024-07-03 |
Preparation and Study of Solid Dispersions of Acyclovir with Starch and Carboxymethylcellulose |
| 2024-06-30 |
Carbon Fibers Based on Cellulose–Lignin Hybrid Filaments: Role of Dehydration Catalyst, Temperature, and Tension during Continuous Stabilization and Carbonization |
| 2024-06-18 |
Potentials of Polyacrylonitrile Substitution by Lignin for Continuous Manufactured Lignin/Polyacrylonitrile-Blend-Based Carbon Fibers |
| 2024-06-14 |
Correction to “Heat?responsive shape memory Eucommia ulmoides gum composites reinforced by zinc dimethacrylate” |
| 2024-06-12 |
Highly adhesive and impact?strengthening supramolecular polyurethane derived from facile incorporation of UPy motifs toward energy dissipation binding applications |
| 2024-06-11 |
Acrylamide macromolecules modified wine lees?soy protein wood adhesive |
| 2024-06-07 |
Assessing the reinforcement effect by response surface methodology of holocellulose from spent coffee grounds on biopolymeric films as food packaging materials |
| 2024-06-07 |
Fluorogenic in?situ Labelling of Gelatin Polymer in Aqueous Solution and Hydrogel |
| 2024-06-07 |
MXene/Silk Fibroin Strengthened PVA–Based Eutectogel with Excellent Self–Healing Ability and Environmental Adaptability: Design, Synthesis, and Sensing Application |
| 2024-06-05 |
Additive Manufacturing of Biodegradable Molybdenum – From Powder to Vascular Stent |
| 2024-06-01 |
Polyoxometalate?Polymer Directed Macromolecular Architectonics of Silver Nanoparticles as Effective Antimicrobials |
| 2024-06-01 |
Novel amphiphilic (AB)3?type star block polymer: Synthesis and micellization study |
| 2024-06-01 |
Synthesis and characterization of cellulose nanofibers improved melamine formaldehyde resin shell microcapsules for phase change thermal storage materials |
| 2024-05-30 |
Crystalline Transformation of Glycolide Induced by Organic Solvents and Relative Humidity |
| 2024-05-29 |
Impact and torsional behavior of additive layer?manufactured biopolymer: An advancement for orthopedic applications |
| 2024-05-28 |
Wearability Analysis of Ag Nanoparticle-Loaded Cotton Fabric Modified by SPEEK/PVA Blend Polymer |
| 2024-05-27 |
Graphene Nanoplatelets/Polylactic Acid Conductive Polymer Composites: Tensile, Thermal and Electrical Properties |
| 2024-05-24 |
Synthesis of star?shaped epoxy resin with excellent mechanical properties using triazine as a skeleton |
| 2024-05-22 |
Polyurethane nanofibers incorporated magnesium hydroxide followed by hydrothermal treatment using chitosan and silver nanoparticles to improve the biological properties |
| 2024-05-20 |
Modified xanthan gum (natural polymeric material) and its derivative for wastewater treatment: A review |
| 2024-05-17 |
The synergy of the matrix modification and fiber geometry to enhance the thermo?mechanical properties of basalt fiber?polypropylene composites for automotive applications |
| 2024-05-17 |
Amino?modified banana nanocellulose aerogels with quick pH?responsive switchable wettability for oil–water separation |
| 2024-05-17 |
Bioinspired chitin/gelatin composites with enhanced mechanical property |
| 2024-05-16 |
Nickel-doped magnetic carbon aerogel derived from xanthan gum: a competent catalyst for the degradation of single and binary dye-based water pollutants |
| 2024-05-15 |
Properties of biopolymer blends based on Rugulopteryx okamurae and hydrophobic polycaprolactone (PCL) and hydrophilic acylated soy protein isolated (SPIa) |
| 2024-05-15 |
Value?added use of spent coffee ground for low?cost poly(3?hydroxybutyrate?co?3?hydroxyvalerate) biocomposite development |
| 2024-05-12 |
The Unprecedented Biodegradable Polyzwitterion: A Removal?Free Patch for Accelerating Infected Diabetic Wound Healing |
| 2024-05-11 |
Microplastic in an apex predator: evidence from Barn owl (Tyto alba) pellets in two sites with different levels of anthropization |
| 2024-05-10 |
Characterization of curing status of commercial tire compounds with vein graphite powder and its particle sizes—Experimental and computational study |
| 2024-05-09 |
Design of Highly Porous Materials Based on Chitosan/Pectin Interpolyelectrolyte Complex for Wound Healing Application |
| 2024-05-08 |
Unleashing the potential of Cajanus cajun biochar polymer composite for Cu (II) removal: mechanism, modification, and application |
| 2024-05-07 |
Effects of SiO2 Nanoparticles on Polyvinyl Alcohol/Carboxymethyl Cellulose Polymer Blend Films’ Structural, Wettability, Surface Roughness, and Optical Characteristics |
| 2024-05-07 |
Synthesis of a highly efficient charring agent and its application to intumescent flame?retardant coatings for 3D?printed polypropylene parts |
| 2024-05-04 |
Anti?fouling capacity enhancement of thin?film composite polyamide membrane by chitosan graft polymerization methods |
| 2024-05-03 |
Nature?Inspired Helicoidal Nanocellulose?Based Multi?Compartment Assemblies with Tunable Chiroptical Properties |
| 2024-05-02 |
A facile and scalable method to synthesize PEGylated PDMAEMA for gene delivery |
| 2024-05-02 |
Evaluation of the polycaprolactone hydrolytic degradation in acid solvent and its influence on the electrospinning process |
| 2024-05-02 |
Nanoarchitectonics and electrocatalytic properties of platinum nanoparticles in weak polyelectrolytes?based multilayer thin films |
| 2024-05-02 |
Effect of Keratin Waste on Poly(??Caprolactone) Films: Structural Characterization, Thermal Properties, and Keratinocytes Viability and Proliferation Studies |
| 2024-05-01 |
Development of Fe?10% (HA/??Tricalcium Phosphate) Composite via Solid?State Manufacturing Route and Investigation of Material Properties for Biodegradable Implant Applications |
| 2024-04-29 |
Influence of Biogenic Material Content on the Biodegradability of Styrene-Butadiene Composites with Incorporated Chlorella vulgaris Biomass |
| 2024-04-29 |
Study on the Properties of PLA- and PP-Based Films for Food Applications Incorporating Orange Peel Extract from Agricultural by-Products |
| 2024-04-29 |
Enhanced Bone Healing in Critical-Sized Rabbit Femoral Defects: Impact of Helical and Alternate Scaffold Architectures |
| 2024-04-29 |
Macroalgae Bioplastics: A Sustainable Shift to Mitigate the Ecological Impact of Petroleum-Based Plastics |
| 2024-04-29 |
Synthesis of PEGylated amphiphilic block copolymers with pendant linoleic moieties by combining ring?opening polymerization and click chemistry |
| 2024-04-28 |
Unveiling the Future of Meat Packaging: Functional Biodegradable Packaging Preserving Meat Quality and Safety |
| 2024-04-28 |
Synthesis of carboxymethyl cellulose from coconut fibers and its application as solid polymer electrolyte membranes |
| 2024-04-28 |
Selected Useful Properties of Polylactide Films Containing Nisaplin and Natamax |
| 2024-04-28 |
Production of Plant-Based, Film-Type Scaffolds Using Alginate and Corn Starch for the Culture of Bovine Myoblasts |
| 2024-04-28 |
Performance of Recycled Polylactic Acid/Amorphous Polyhydroxyalkanoate Blends |
| 2024-04-28 |
Cationic Azobenzenes as Light-Responsive Crosslinkers for Alginate-Based Supramolecular Hydrogels |
| 2024-04-28 |
Mechanical and Rheological Evaluation of Polyester-Based Composites Containing Biochar |
| 2024-04-28 |
Experimental and Numerical Investigation of Dynamic Damage and Load Transfer of PBX Substitute Material under Low Velocity Impact |
| 2024-04-28 |
Development and Study of Novel Ultrafiltration Membranes Based on Cellulose Acetate |
| 2024-04-28 |
Preparation and Structural Analysis of a Water-Soluble Aminated Lignin |
| 2024-04-27 |
Study on the Effect of Citric Acid-Modified Chitosan on the Mechanical Properties, Shrinkage Properties, and Durability of Concrete |
| 2024-04-27 |
Synthesis and Oxidative Degradation of Leucine-Based Poly(diacylhydrazine) |
| 2024-04-27 |
Nanocelluloses and Their Applications in Conservation and Restoration of Historical Documents |
| 2024-04-26 |
Development of binary and ternary polyester shape memory blends for additive manufacturing |
| 2024-04-26 |
Influence of sodium hydroxide, silane, and siloxane treatments on the moisture sensitivity and mechanical properties of flax fiber composites |
| 2024-04-26 |
Toxicological Characteristics of Bacterial Nanocellulose in an In Vivo Experiment—Part 1: The Systemic Effects |
| 2024-04-26 |
Influence of Programming and Recovery Parameters on Compressive Behaviors of 4D Printed Bio?compatible PVC?PCL Blends |
| 2024-04-26 |
Sustainable strategies towards better utilization of synthetic polymers |
| 2024-04-26 |
Biopolymer Meets Nanoclay: Rational Fabrication of Superb Adsorption Beads from Green Precursors for Efficient Capture of Pb(II) and Dyes |
| 2024-04-26 |
Transparent and Efficient Wood-Based Triboelectric Nanogenerators for Energy Harvesting and Self-Powered Sensing |
| 2024-04-26 |
Study of Cellulose Dissolution in ZnO/NaOH/Water Solvent Solution and Its Temperature-Dependent Effect Using Molecular Dynamics Simulation |
| 2024-04-26 |
High-Temperature Polylactic Acid Proves Reliable and Safe for Manufacturing 3D-Printed Patient-Specific Instruments in Pediatric Orthopedics—Results from over 80 Personalized Devices Employed in 47 Surgeries |
| 2024-04-26 |
Biodegradation Study of Styrene–Butadiene Composites with Incorporated Arthrospira platensis Biomass |
| 2024-04-26 |
Predicting Mechanical Properties of Polymer Materials Using Rate-Dependent Material Models: Finite Element Analysis of Bespoke Upper Limb Orthoses |
| 2024-04-26 |
Injectable Thermo-Responsive Peptide Hydrogels and Its Enzyme Triggered Dynamic Self-Assembly |
| 2024-04-26 |
Evaluation of Thermoplastic Starch Contamination in the Mechanical Recycling of High-Density Polyethylene |
| 2024-04-25 |
The Effectiveness Mechanisms of Carbon Nanotubes (CNTs) as Reinforcements for Magnesium-Based Composites for Biomedical Applications: A Review |
| 2024-04-25 |
Micro/nano fillers for value?added polymer composites: A comprehensive review |
| 2024-04-25 |
Development of Anisotropic Electrically Conductive GNP?Reinforced PCL?Collagen Scaffold for Enhanced Neurogenic Differentiation under Electrical Stimulation |
| 2024-04-25 |
The Cryoprotective Effect of an Antifreeze Collagen Peptide Complex Obtained by Enzymatic Glycosylation on Tilapia |
| 2024-04-25 |
Analytical Pyrolysis of Soluble Bio-Tar from Steam Pretreatment of Bamboo by Using TG–FTIR and Py–GC/MS |
| 2024-04-25 |
Kinetic Assessment of Kraft and Thermally Upgraded Kraft Papers Aged in Five Alternative Dielectric Fluids |
| 2024-04-25 |
Improved Protein Removal Performance of PES Hollow-Fiber Ultrafiltration Membrane with Sponge-like Structure |
| 2024-04-25 |
Pervaporation Membranes Based on Polyelectrolyte Complex of Sodium Alginate/Polyethyleneimine Modified with Graphene Oxide for Ethanol Dehydration |
| 2024-04-25 |
Investigating the impact of laser polishing parameters on surface roughness, mass ablation rate, and optical transmittance of 3D?printed PLA substrates |
| 2024-04-25 |
Effect of screw speed in compounding of poly(butylene adipate?co?terephthalate)/thermoplastic starch blends and their processability by cast extrusion |
| 2024-04-25 |
Fabrication of poly(acrylic acid)/chitosan/linseed mucilage films: Thermal and mechanical properties |
| 2024-04-25 |
Cellulose Nanocomposite Tough Hydrogels: Synergistic Self?Healing, Adhesive, and Strain?Sensitive Properties |
| 2024-04-24 |
One?pot synthesis of aluminum phosphate?supported, chitosan?linked expandable graphite as a novel flame retardant for textile |
| 2024-04-24 |
Lignocellulosic-Based/High Density Polyethylene Composites: A Comprehensive Study on Fiber Characteristics and Performance Evaluation |
| 2024-04-24 |
Direct Jet Co-Electrospinning of Spinal Cord-Mimicking Phantom for Diffusion Magnetic Resonance Imaging |
| 2024-04-24 |
Preparation of Filter Paper from Bamboo and Investigating the Effect of Additives |
| 2024-04-24 |
Development of Light, Strong, and Water-Resistant PVA Composite Aerogels |
| 2024-04-24 |
Effect of Nano Spinel Ferrites Co0.9Cu0.1Fe2O4 on Non-Isothermal Cold Crystallization Behaviours and Kinetics of Its Composites with Polylactic Acid |
| 2024-04-24 |
Discoloration and Surface Changes in Spruce Wood after Accelerated Aging |
| 2024-04-24 |
Combining Solution-Blowing and Melt-Blowing Techniques to Produce an Efficient Non-Woven Filter |
| 2024-04-23 |
Factors Affecting Silica/Cellulose Nanocomposite Prepared via the Sol–Gel Technique: A Review |
| 2024-04-23 |
Impact of Carbon-Based Nanoparticles on Polyvinyl Alcohol Polarizer Features: Photonics Applications |
| 2024-04-23 |
Optimised Degradation of Lignocelluloses by Edible Filamentous Fungi for the Efficient Biorefinery of Sugar Beet Pulp |
| 2024-04-23 |
Pharmaceutical Applications of Biomass Polymers: Review of Current Research and Perspectives |
| 2024-04-23 |
Modification of High-Density Polyethylene with a Fibrillar–Porous Structure by Biocompatible Polyvinyl Alcohol via Environmental Crazing |
| 2024-04-23 |
Cellulose Nitrates-Blended Composites from Bacterial and Plant-Based Celluloses |
| 2024-04-22 |
Sustainable characterization of brake pads using raw/silane?treated Mimosa pudica fibers for automobile applications |
| 2024-04-22 |
Optimization of Environment-Friendly and Sustainable Polylactic Acid (PLA)-Constructed Triply Periodic Minimal Surface (TPMS)-Based Gyroid Structures |
| 2024-04-22 |
Effect of varying core density and material on the quasi?static behaviors of sandwich structure with 3D?printed hexagonal honeycomb core |
| 2024-04-22 |
Barium titanate exposure on metallographic and mechanical performance of coir fiber made low?density polyethylene composite |
| 2024-04-22 |
Effect of Microwave Treatment on Protease Activity, Dough Properties and Protein Quality in Sprouted Wheat |
| 2024-04-22 |
Chitosan?containing electrospun poly(ethylene oxide)?polybutadiene?CNT fibers |
| 2024-04-22 |
Fabrication and Tuning the Morphological, Structural and Dielectric Characteristics of PVA-PEG-SiO2-Co2O3 Nanocomposite Films for Nanoelectronics and Energy Storage Devices |
| 2024-04-21 |
Investigation of Cellulose-Based Materials Applied in Life Sciences Using Laser Light Scattering Methods |
| 2024-04-21 |
Reversible polymer networks based on polylactide with tetraphenylethane thermally dissociating groups in crosslinks |
| 2024-04-21 |
Polyester networks based on Tulipalin A and ??caprolactone and activation of the Thioether groups by incorporation of trialkylsulfonium salts |
| 2024-04-20 |
Polycaprolactone-Based Composite Electrospun Nanofibers as Hybrid Biomaterial Systems Containing Hydroxyl- or Carboxylic Acid-Functionalized Multiwall Carbon Nanotubes |
| 2024-04-20 |
Natural and Synthetic Polymers for Biomedical and Environmental Applications |
| 2024-04-20 |
Degradable Nanogels Based on Poly[Oligo(Ethylene Glycol) Methacrylate] (POEGMA) Derivatives through Thermo-Induced Aggregation of Polymer Chain and Subsequent Chemical Crosslinking |
| 2024-04-20 |
Biodegradation of Nitrile Gloves as Sole Carbon Source of Pseudomonas aeruginosa in Liquid Culture |
| 2024-04-20 |
High-Performance, Easy-to-Fabricate, Nanocomposite Heater for Life Sciences and Biomedical Applications |
| 2024-04-19 |
Characterization of Biodegradable Polymers for Porous Structure: Further Steps toward Sustainable Plastics |
| 2024-04-19 |
Unveiling the Nanoconfinement Effect on Crystallization of Semicrystalline Polymers Using Coarse-Grained Molecular Dynamics Simulations |
| 2024-04-19 |
Raman Technology for Process Control: Waste Shell Demineralization for Producing Transparent Polymer Foils Reinforced with Natural Antioxidants and Calcium Acetate By-Products |
| 2024-04-18 |
Influence of Manufacturing Process on the Conductivity of Material Extrusion Components: A Comparison between Filament- and Granule-Based Processes |
| 2024-04-18 |
Using Biopolymers as Anti-Washout Admixtures under Water Concreting |
| 2024-04-18 |
Improved Recovery of Complete Spinal Cord Transection by a Plasma-Modified Fibrillar Scaffold |
| 2024-04-18 |
Computational Fluid Dynamics Analysis and Empirical Evaluation of Carboxymethylcellulose/Alginate 3D Bioprinting Inks for Screw-Based Microextrusion |
| 2024-04-18 |
OH End-Capped Silicone as an Effective Nucleating Agent for Polylactide—A Robotizing Method for Evaluating the Mechanical Characteristics of PLA/Silicone Blends |
| 2024-04-18 |
FDM 3D Printing and Properties of PBAT/PLA Blends |
| 2024-04-17 |
Characterization of Waste Nicotiana rustica L. (Tobacco) Fiber Having a Potential in Textile and Composite Applications |
| 2024-04-17 |
Νovel Polylactic Acid/Tetraethyl Citrate Self-Healable Active Packaging Films Applied to Pork Fillets’ Shelf-Life Extension |
| 2024-04-17 |
Study on the Interaction of Polymeric Chemical Additives with Phase Change Materials in Air Lime Renders |
| 2024-04-17 |
Resource recovery from soiled sanitary napkin waste—a state-of-the-art review |
| 2024-04-17 |
Enhancing the performance of poly(ethylene oxide) solid electrolytes through synergistic interaction of starch and butanedinitrile |
| 2024-04-17 |
Change in the Low-Cycle Performance on the 3D-Printed Materials ABS, ASA, HIPS, and PLA Exposed to Mineral Oil |
| 2024-04-17 |
Mimicking the Physicochemical Properties of the Cornea: A Low-Cost Approximation Using Highly Available Biopolymers |
| 2024-04-17 |
Evaluation of Chemical and Biological Properties of Biodegradable Composites Based on Poly(3-hydroxybutyrate) and Chitosan |
| 2024-04-17 |
Preparation of a Lignin-Based Cationic Flocculant and Its Application in Kaolin Suspension Treatment |
| 2024-04-17 |
Preparation of efficient and eco?friendly solid polymer electrolyte based on anionic polyurethane dispersion, polyethylene oxide, and halloysite nanotube |
| 2024-04-16 |
Thermally-Activated Shape Memory Behavior of Biodegradable Blends Based on Plasticized PLA and Thermoplastic Starch |
| 2024-04-16 |
Tailoring the Mass Density of 3D Printing Materials for Accurate X-ray Imaging Simulation by Controlled Underfilling for Radiographic Phantoms |
| 2024-04-16 |
Lignin Derived Ultra?Thin All?Solid Polymer Electrolytes with Three dimensional Single?ion Nanofiber Ionic Bridge Framework for High Performance Lithium Batteries |
| 2024-04-16 |
Isocyanate?chitin modified microspheres for chiral drug separation in high performance liquid chromatography |
| 2024-04-16 |
Innovative Materials Based on Epoxy Resin for Use as Seat Elements in Bulk Transport |
| 2024-04-16 |
Evaluation of the Viability of 3D Printing in Recycling Polymers |
| 2024-04-16 |
Novel Biocomposite of Starch and Flax Fiber Modified with Tannic Acid with Biocidal Properties |
| 2024-04-16 |
Influences of Polyphenols on the Properties of Crosslinked Acellular Fish Swim Bladders: Experiments and Molecular Dynamic Simulations |
| 2024-04-16 |
Preparation of Activated Carbon-Reinforced Composite Beads Based on MnO2/MCM-41@Fe3O4 and Calcium Alginate for Efficient Removal of Tetracycline in Aqueous Solutions |
| 2024-04-16 |
Applying the Taguchi Method to Improve Key Parameters of Extrusion Vacuum-Forming Quality |
| 2024-04-15 |
Static and dynamic mechanical characterization and thermal analysis for multi?ply structure of woven nettle (Girardinia diversifolia) reinforced poly(lactic acid) biocomposites |
| 2024-04-15 |
Sustainable Processes and Physico-Chemical Characterization of Artisanal Spontaneous Gluten Free Sourdough (Quinoa, Amaranth and Brown Rice) Compared to Wheat Sourdough |
| 2024-04-15 |
Comparative Analysis of Physicochemical and Functional Properties of Pectin from Extracted Dragon Fruit Waste by Different Techniques |
| 2024-04-15 |
Modeling, Fabrication and Characteristics of Novel (PVA-SiC-In2O3) Nanohybrid Structures for Optoelectronic Applications |
| 2024-04-15 |
Porous organic polymers |
| 2024-04-14 |
Nanocellulose Grades with Different Morphologies and Surface Modification as Additives for Waterborne Epoxy Coatings |
| 2024-04-14 |
Development of Biphasic Injectable Hydrogels for Meniscus Scaffold from Photocrosslinked Glycidyl Methacrylate-Modified Poly(Vinyl Alcohol)/Glycidyl Methacrylate-Modified Silk Fibroin |
| 2024-04-13 |
The process?structure–property relationship of 3D printed G?Polymer using fused filament fabrication technique |
| 2024-04-13 |
Physicochemical Characterization and In Vitro Activity of Poly(ε-Caprolactone)/Mycophenolic Acid Amorphous Solid Dispersions |
| 2024-04-13 |
Analysing the Suitability of Using Different Biodegradable Fluids for Power Transformers with Thermally Upgraded Paper |
| 2024-04-12 |
Xanthan gum?toughened hydrogel for durable strain and pressure sensors |
| 2024-04-12 |
Fabrication and characterizations of screw pine root fiber reinforced soy composite as sustainable green composite |
| 2024-04-12 |
Molecular dynamics simulations of the solubility of chitosan grafted polyacrylamide and its adsorption mechanism with kaolinite: Impact of length and distribution of branched?chain |
| 2024-04-12 |
Polyhydroxyalkanoate Production from Eucalyptus Bark’s Enzymatic Hydrolysate |
| 2024-04-12 |
Advances in Nanocarrier Systems for Overcoming Formulation Challenges of Curcumin: Current Insights |
| 2024-04-12 |
Enhancing Alginate Hydrogels as Possible Wound-Healing Patches: The Synergistic Impact of Reduced Graphene Oxide and Tannins on Mechanical and Adhesive Properties |
| 2024-04-11 |
Mechanical, Thermal, and Physicochemical Properties of Filaments of Poly (Lactic Acid), Polyhydroxyalkanoates and Their Blend for Additive Manufacturing |
| 2024-04-11 |
Effect of hydroxyapatite and pulsed electromagnetic field on osteogenic differentiation of human stem cells seeded onto 3D?printed polycaprolactone scaffolds for future bone graft transplantation |
| 2024-04-11 |
Manufacturing Options for Activated Carbons with Selected Synthetic Polymers as Binders |
| 2024-04-11 |
Preparation and Characterization of Polyvinyl Alcohol (PVA)/Carbonized Waste Rubber Biocomposite Films |
| 2024-04-11 |
Valorization of Cork Stoppers, Coffee-Grounds and Walnut Shells in the Development and Characterization of Pectin-Based Composite Films: Physical, Barrier, Antioxidant, Genotoxic, and Biodegradation Properties |
| 2024-04-11 |
Effect of Hot-Pressing Temperature on the Properties of Eco-Friendly Fiberboard Panels Bonded with Hydrolysis Lignin and Phenol–Formaldehyde Resin |
| 2024-04-11 |
Biopolymeric Nanocomposites for CO2 Capture |
| 2024-04-11 |
In Vivo Evaluation of Innovative Gadolinium-Based Contrast Agents Designed for Bioimaging Applications |
| 2024-04-11 |
Effect of Graphene Oxide Localization on Morphology Development and Rheological and Mechanical Properties of Poly(Lactic Acid)/Ethylene Vinyl Alcohol Copolymer Blend Composites: A Comprehensive Study |
| 2024-04-11 |
A High-Proton Conductivity All-Biomass Proton Exchange Membrane Enabled by Adenine and Thymine Modified Cellulose Nanofibers |
| 2024-04-11 |
Enhancing Polyvinyl Alcohol Nanocomposites with Carboxy-Functionalized Graphene: An In-Depth Analysis of Mechanical, Barrier, Electrical, Antibacterial, and Chemical Properties |
| 2024-04-10 |
Using Bayesian Regularized Artificial Neural Networks to Predict the Tensile Strength of Additively Manufactured Polylactic Acid Parts |
| 2024-04-10 |
Development of Flame-Retardant Polylactic Acid Formulations for Additive Manufacturing |
| 2024-04-10 |
Effect of Aging on Tensile and Chemical Properties of Polylactic Acid and Polylactic Acid-Like Polymer Materials for Additive Manufacturing |
| 2024-04-10 |
Genetically Fusing Order?Promoting and Thermoresponsive Building Blocks to Design Hybrid Biomaterials |
| 2024-04-10 |
Cellulose acetate nanofiber modified with polydopamine polymerized MOFs for efficient removal of noxious organic dyes |
| 2024-04-10 |
Ion-Cross-Linked Hybrid Photochromic Hydrogels with Enhanced Mechanical Properties and Shape Memory Behaviour |
| 2024-04-10 |
Biocomposite Based on Polylactic Acid and Rice Straw for Food Packaging Products |
| 2024-04-10 |
Composites of Poly(3-hydroxybutyrate) and Mesoporous SBA-15 Silica: Crystalline Characteristics, Confinement and Final Properties |
| 2024-04-10 |
Poly(Butylene Adipate-co-Terephthalate)/Polylactic Acid/Tetrapod-Zinc Oxide Whisker Composite Films with Antibacterial Properties |
| 2024-04-10 |
Release and Degradation Mechanism of Modified Polyvinyl Alcohol-Based Double-Layer Coated Controlled-Release Phosphate Fertilizer |
| 2024-04-10 |
Antifungal Capacity of Microcapsules Containing Lactiplantibacillus plantarum TEP15 or Lactiplantibacillus pentosus TEJ4 |
| 2024-04-09 |
Thermal Properties’ Enhancement of PLA-Starch-Based Polymer Composite Using Sucrose |
| 2024-04-09 |
Exploring the substrate spectrum of phylogenetically distinct bacterial polyesterases |
| 2024-04-09 |
Sustainable harnessing of waste polycarbonate for synthesizing activated furans to generate Stenhouse adducts on polymer surface |
| 2024-04-09 |
Effects of photodegradation performance with PLA?containing samples on double injection molding |
| 2024-04-09 |
Polylactic acid/epoxidized linseed oil/polypropylene grafted maleic anhydride: A promising combination of toughness and rigidity |
| 2024-04-09 |
Preparation and performance study of thermally conductive coatings with mixed fillers |
| 2024-04-09 |
Active Films of Cassava Starch Incorporated with Carvacrol Nanocapsules |
| 2024-04-09 |
Precisely Printable Silk Fibroin/Carboxymethyl Cellulose/Alginate Bioink for 3D Printing |
| 2024-04-09 |
The Impacts of the Sterilization Method and the Electrospinning Conditions of Nanofibrous Biodegradable Layers on Their Degradation and Hemocompatibility Behavior |
| 2024-04-09 |
Peppermint oil?infused polylactic acid films: A novel approach for antimicrobial and biodegradable food packaging |
| 2024-04-08 |
Enhancement of spent coffee grounds as biofiller in biodegradable polymer composite for sustainable packaging |
| 2024-04-08 |
Electrospun Fenoprofen/Polycaprolactone @ Tranexamic Acid/Hydroxyapatite Nanofibers as Orthopedic Hemostasis Dressings |
| 2024-04-08 |
Recent Progress on Conversion of Lignocellulosic Biomass by MOF-Immobilized Enzyme |
| 2024-04-08 |
Effect of Biodegradable Nonwoven Mulches from Natural and Renewable Sources on Lettuce Cultivation |
| 2024-04-08 |
TEMPO-Oxidized Nanocellulose Films Modified by Tea Saponin Derived from Camellia oleifera: Physicochemical, Mechanical, and Antibacterial Properties |
| 2024-04-08 |
A Comparative Study of Removal of Acid Red 27 by Adsorption on Four Different Chitosan Morphologies |
| 2024-04-08 |
Boosting of Structural, Optical, and Dielectric Characteristics of PVA Polymer Using CoO-SiO2 Nanoparticles for Advanced Optoelectronic Applications |
| 2024-04-07 |
Super?Ionic Conductor Soft Filler Promotes Li+ Transport in Integrated Cathode?Electrolyte for Solid?State Battery at Room Temperature |
| 2024-04-07 |
A Biohybrid Self?Dispersing Miniature Machine Using Wild Oat Fruit Awns for Reforestation and Precision Agriculture |
| 2024-04-07 |
Processing of Thin Films Based on Cellulose Nanocrystals and Biodegradable Polymers by Space-Confined Solvent Vapor Annealing and Morphological Characteristics |
| 2024-04-07 |
Investigating How the Properties of Electrospun Poly(lactic acid) Fibres Loaded with the Essential Oil Limonene Evolve over Time under Different Storage Conditions |
| 2024-04-07 |
A Novel Nanofiber Hydrogel Adhesive Based on Carboxymethyl Cellulose Modified by Adenine and Thymine |
| 2024-04-06 |
The Characterization of a Biodegradable Mg Alloy after Powder Bed Fusion with Laser Beam/Metal Processing for Custom Shaped Implants |
| 2024-04-06 |
Cellulose nanowhiskers?reinforced polymer nanofibers for photoresponsive authentication |
| 2024-04-06 |
Room temperature phosphorescence from natural, organic emitters and their application in industrially compostable programmable luminescent tags |
| 2024-04-06 |
Fabrication, and characterization of crosslinked sodium alginate/hyaluronic acid/gelatin 3Dprinted heparin-loaded scaffold |
| 2024-04-06 |
New Composites Derived from the Natural Fiber Polymers of Discarded Date Palm Surface and Pineapple Leaf Fibers for Thermal Insulation and Sound Absorption |
| 2024-04-06 |
Recent Progress of Carrageenan-Based Composite Films in Active and Intelligent Food Packaging Applications |
| 2024-04-06 |
Bio?blends of virgin and post?industrial poly(methyl methacrylate) waste/pristine chitosan: Structure, thermal, and physical properties |
| 2024-04-05 |
Polymers and their engineered analogues for ocular drug delivery: Enhancing therapeutic precision |
| 2024-04-05 |
Determining the Relationship between Delivery Parameters and Ablation Distribution for Novel Gel Ethanol Percutaneous Therapy in Ex Vivo Swine Liver |
| 2024-04-05 |
Development of Polylactic Acid Films with Alkali- and Acetylation-Treated Flax and Hemp Fillers via Solution Casting Technique |
| 2024-04-05 |
Effect of Environmental pH on the Mechanics of Chitin and Chitosan: A Single-Molecule Study |
| 2024-04-04 |
Evaluation of Various Types of Alginate Inks for Light-Mediated Extrusion 3D Printing |
| 2024-04-04 |
Enhancing the Weld Quality of Polylactic Acid Biomedical Materials Using Rotary Friction Welding |
| 2024-04-04 |
Evaluation and Modeling of Polylactide Photodegradation under Ultraviolet Irradiation: Bio-Based Polyester Photolysis Mechanism |
| 2024-04-04 |
Conventional Dental Impressions vs. Impressions Reinforced with Rigid Mouthguards |
| 2024-04-04 |
A Novel Method to Enhance the Mechanical Properties of Polyacrylonitrile Nanofiber Mats: An Experimental and Numerical Investigation |
| 2024-04-04 |
Polyurethane?based nanocomposite for catalytic reduction of toxic dyes |
| 2024-04-04 |
Polymers as candidates for broad?spectrum antivirals—in vitro inhibition of Zika virus with sodium polyanethole sulfonate |
| 2024-04-04 |
Exploring the efficacy of various essential oils in chitosan?based composite biopolymer films for food packaging |
| 2024-04-04 |
Bioactive materials?coated polybutylene?adipate?co?terephthalate 3D?printed scaffolds for application in the bone tissues engineering |
| 2024-04-03 |
Fabrication of a PLA/PVA-BIO-HA Polymeric Membrane by the Electrospinning Technique |
| 2024-04-03 |
Effect of Plasticization/Annealing on Thermal, Dynamic Mechanical, and Rheological Properties of Poly(Lactic Acid) |
| 2024-04-03 |
Improvement in Crystallization, Thermal, and Mechanical Properties of Flexible Poly(L-lactide)-b-poly(ethylene glycol)-b-poly(L-lactide) Bioplastic with Zinc Phenylphosphate |
| 2024-04-03 |
Mechanistic Insights into the Effects of Ureas and Monomers on the Ring-Opening Alternating Copolymerization of Epoxides and Anhydrides Catalyzed by Organic Base/Urea |
| 2024-04-03 |
Recrystallization of Cellulose, Chitin and Starch in Their Individual and Native Forms |
| 2024-04-02 |
Poly(ether?ester)s synthesized from furandicarboxylic acid and ethylene glycol using an acidic binary catalyst |
| 2024-04-02 |
Design, characterization, and performance evaluation of novel PVA/CS/CNF/MOP TN ionic conductive hydrogels for flexible sensors |
| 2024-04-02 |
Superabsorbent Hydrogels in the Agriculture and Reclamation of Degraded Areas |
| 2024-04-01 |
Effect of nitrogen retention composite additives Ca(H2PO4)2 and MgSO4 on the degradation of lignocellulose, compost maturation, and fungal communities in compost |
| 2024-04-01 |
Eco-Friendly, Biodegradable Starch-Based Packaging Materials with Antioxidant Features |
| 2024-04-01 |
Erythrosine–Dialdehyde Cellulose Nanocrystal Coatings for Antibacterial Paper Packaging |
| 2024-04-01 |
Flexible PLA Copolymers with Low Melt Flow Index for Blown Film Applications |
| 2024-04-01 |
Isolation of microcrystalline cellulose from Musa paradisiaca (banana) plant leaves: physicochemical, thermal, morphological, and mechanical characterization for lightweight polymer composite applications |
| 2024-03-31 |
Chitosan Gel Hydroxypropyl Methylcellulose Membranes: A Novel Approach for the Remediation of Cadmium in Aqueous Solutions and Soils |
| 2024-03-31 |
Preparation of poly(lactic acid) (PLA)/poly(3?hydroxybutyrate?co?3?hydroxyvalerate) (PHBV)/graphene oxide (GO) polymeric composites for the selective removal of lead ions (Pb(II)) in water |
| 2024-03-30 |
Development of Eco-Friendly Soy Protein Fiber: A Comprehensive Critical Review and Prospects |
| 2024-03-30 |
Embracing Sustainability: The World of Bio-Based Polymers in a Mini Review |
| 2024-03-30 |
Spray Coating of Wood with Nanoparticles from Lignin and Polylactic Glycolic Acid Loaded with Thyme Essential Oils |
| 2024-03-30 |
Effect of Operational Variables on Supercritical Foaming of Caffeic Acid-Loaded Poly(lactic acid)/Poly(butylene adipate-co-terephthalate) Blends for the Development of Sustainable Materials |
| 2024-03-29 |
Reinforcement and Deacidification for a Textile Scroll Painting (AD 1881) Using the CNF and MgO Suspensions |
| 2024-03-29 |
Chitosan-Based Films Blended with Tannic Acid and Moringa Oleifera for Application in Food Packaging: The Preservation of Strawberries (Fragaria ananassa) |
| 2024-03-29 |
Multifunctional coatings on Mg?based metallic biomaterials and implants |
| 2024-03-29 |
Development of sustainable ternary bionanocomposite film reinforced with nanocellulose and nanoclay for microbial efficacy |
| 2024-03-29 |
Synergistic evolution of stable bioactivity and better mechanical strength in polyvinyl alcohol and sweet lime peel film |
| 2024-03-29 |
Determination of the Mass Fractions of the Heavy Metals in the Recycled Cellulose Pulp |
| 2024-03-29 |
Fabrication of High-Performance Densified Wood via High-Pressure Steam Treatment and Hot-Pressing |
| 2024-03-29 |
Effect of Plasma Treatment on Bamboo Fiber-Reinforced Epoxy Composites |
| 2024-03-29 |
Advancing Food Preservation: Sustainable Green-AgNPs Bionanocomposites in Paper-Starch Flexible Packaging for Prolonged Shelf Life |
| 2024-03-29 |
Exploring Dielectric and Magnetic Properties of Ni and Co Ferrites through Biopolymer Composite Films |
| 2024-03-28 |
MXene/silk fibroin strengthened PVA?based eutectogel with excellent self?healing ability and environmental adaptability: Design, synthesis, and sensing application |
| 2024-03-28 |
A Sulfonic-Functionalized Cellulose Adsorbent for the Rapid Removal of Cerium (III) from Aqueous Solutions |
| 2024-03-28 |
Exploring the Untapped Potential of Pine Nut Skin By-Products: A Holistic Characterization and Recycling Approach |
| 2024-03-28 |
Photothermal Performance of Lignin-Based Nanospheres and Their Applications in Water Surface Actuators |
| 2024-03-28 |
Influence of esterified kraft lignin as an interfacial compatibilizer on mechanical properties of acrylonitrile–butadiene–styrene/basalt fiber composites |
| 2024-03-27 |
Failure mode analysis and prediction model of additively manufactured continuous carbon fiber?reinforced polylactic acid |
| 2024-03-27 |
Development of antibacterial edible films for food packaging using tragacanth gum, carrageenan, and clove essential oil |
| 2024-03-27 |
Understanding the Effects of Adding Metal Oxides to Polylactic Acid and Polylactic Acid Blends on Mechanical and Rheological Behaviour, Wettability, and Photo-Oxidation Resistance |
| 2024-03-27 |
Electrospun MoS2-CNTs-PVA/PVA Hybrid Separator for High-Performance Li/FeS2 Batteries |
| 2024-03-27 |
Waterborne polyurethane polymer dispersions using Castor oil and curcumin as bioresources: Synthesis, characterization, and antibacterial textile applications |
| 2024-03-26 |
Development and characterization of microwave?processed linear low?density polyethylene based sisal/jute hybrid laminates |
| 2024-03-26 |
Effect of Starch and Paperboard Reinforcing Structures on Insulative Fiber Foam Composites |
| 2024-03-26 |
Role of crosslinkers on the properties of bio?based wood adhesives |
| 2024-03-25 |
Application of plasma?activated silanized cellulose nanofibers in natural rubber composites |
| 2024-03-25 |
Modification of rice hull powder by in situ generation of silver nanoparticales for antibacterial composite filler applications |
| 2024-03-25 |
Biobased Composites of Poly(Lactic Acid) Melt Compounded with Bacterial and Vegetal Nanocelluloses Incorporated through Different Strategies |
| 2024-03-25 |
Characterization of Polylactic Acid Biocomposites Filled with Native Starch Granules from Dioscorea remotiflora Tubers |
| 2024-03-25 |
Mechanical, viscoelastic, and biodegradability characteristics of ramie fibre?reinforced acrylonitrile butadiene styrene composites |
| 2024-03-24 |
A Remarkable Impact of pH on the Thermo-Responsive Properties of Alginate-Based Composite Hydrogels Incorporating P2VP-PEO Micellar Nanoparticles |
| 2024-03-24 |
Effect of Adding Red Propolis to Edible Biodegradable Protein Films for Coating Grapes: Shelf Life and Sensory Analysis |
| 2024-03-24 |
Fabrication of Poly(Lactic Acid)@TiO2 Electrospun Membrane Decorated with Metal–Organic Frameworks for Efficient Air Filtration and Bacteriostasis |
| 2024-03-23 |
Improving the Accuracy of the Evaluation Method for the Interfacial Shear Strength of Fiber-Reinforced Thermoplastic Polymers through the Short Beam Shear Test |
| 2024-03-23 |
Effect of Chitosan–Riboflavin Bioconjugate on Green Mold Caused by Penicillium digitatum in Lemon Fruit |
| 2024-03-22 |
Effects of PLA-Type and Reinforcement Content on the Mechanical Behavior of Additively Manufactured Continuous Ramie Fiber-Filled Biocomposites |
| 2024-03-22 |
Nonwoven Reinforced Photocurable Poly(glycerol sebacate)-Based Hydrogels |
| 2024-03-22 |
Dendritic Polymer?Based Nanomedicines Remodel the Tumor Stroma: Improve Drug Penetration and Enhance Antitumor Immune Response |
| 2024-03-22 |
Preparation and performance evaluation of modified soy protein isolate polymeric dust suppressant using graft copolymerization |
| 2024-03-22 |
Effect of Chitosan and Its Water-Soluble Derivatives on Antioxidant Activity |
| 2024-03-22 |
The Effect of Different Factors on Poly(lactic-co-glycolic acid) Nanoparticle Properties and Drug Release Behaviors When Co-Loaded with Hydrophilic and Hydrophobic Drugs |
| 2024-03-22 |
Stability and Bioaccessibility of Quercetin-Enriched Pickering Emulsion Gels Stabilized by Cellulose Nanocrystals Extracted from Rice Bran |
| 2024-03-22 |
Environment-Friendly Preparation and Characterization of Multilayered Conductive PVP/Col/CS Composite Doped with Nanoparticles as Potential Nerve Guide Conduits |
| 2024-03-22 |
Simultaneous Formation of Polyhydroxyurethanes and Multicomponent Semi-IPN Hydrogels |
| 2024-03-22 |
The Application of Chitosan-Based Adsorbents for the Removal of Hazardous Pollutants from Aqueous Solutions—A Review |
| 2024-03-22 |
Temperature dependence of polymer melt viscosity obtained based on DSC data and the consistency between thermodynamic and kinetic fragility |
| 2024-03-22 |
Surface coatings of contact lenses for cell sheet transplantation |
| 2024-03-21 |
Evaluation of in vitro corrosion behavior and biocompatibility of poly[xylitol?(1,12?dodecanedioate)](PXDD)?HA coated porous iron for bone scaffolds applications |
| 2024-03-21 |
Role of the plasticizers on the crystallization of PLA and its composites with mesoporous MCM-41 |
| 2024-03-21 |
Strategies for Improving Sustainability in the Development of High-Performance Styrenic Block Copolymers by Developing Blends with Cellulose Derivatives |
| 2024-03-21 |
Glycerol Acrylate-Based Photopolymers with Antimicrobial and Shape-Memory Properties |
| 2024-03-21 |
Analysis of the Mechanical Degradability of Biodegradable Polymer-Based Bags in Different Environments |
| 2024-03-21 |
Astragaloside IV restrains pulmonary fibrosis progression via the circ_0008898/miR?211?5p/HMGB1 axis |
| 2024-03-20 |
Advancing additive manufacturing: 3D?printing of hybrid natural fiber sandwich (Nona/Soy?PLA) composites through filament extrusion and its effect on thermomechanical properties |
| 2024-03-20 |
Valorization of Agro-Wastes as Fillers in PLA-Based Biocomposites for Increasing Sustainability in Fused Deposition Modeling Additive Manufacturing |
| 2024-03-20 |
Harmless photonic crystal tattoo with angle?independent structural color based on SiO2 nanoparticles and silk fibroin |
| 2024-03-20 |
Preparation and characterization of a chitosan/TiO2 nanocomposite hydrogel intended for the photocatalytic degradation of pollutants |
| 2024-03-20 |
Mechanical Characteristics of Individualized Biodegradable Augmentation Scaffold—In Vitro Pilot Study |
| 2024-03-20 |
Ethylene Scavenging Films Based on Ecofriendly Plastic Materials and Nano-TiO2: Preparation, Characterization, and In Vivo Evaluation |
| 2024-03-20 |
Chitosan-Enhanced pH-Sensitive Anthocyanin Indicator Film for the Accurate Monitoring of Mutton Freshness |
| 2024-03-20 |
Isobornyl and Isocamphyl Photostabilizers in Poly(lactic acid)-Based Electrospun Fibers |
| 2024-03-20 |
Long?acting release of small molecules achieved by barrier effect of nano?brick |
| 2024-03-20 |
Dynamically vulcanized CNC?reinforced thermoplastic elastomer based on PP/EPDM: Morphology and mechanical properties control via interfacial compatibilization |
| 2024-03-20 |
Special interface structure and properties for compatible packaging film from biodegradable poly (butylene adipate?co?terephthalate)/corn starch composite |
| 2024-03-19 |
Synthesis and suitability characterization of microcrystalline cellulose from Citrus x sinensis sweet orange peel fruit waste-based biomass for polymer composite applications |
| 2024-03-19 |
Preliminary Assessment of Tara Gum as a Wall Material: Physicochemical, Structural, Thermal, and Rheological Analyses of Different Drying Methods |
| 2024-03-19 |
Polymer-Based Drug Delivery Systems for Cancer Therapeutics |
| 2024-03-19 |
Effect of Pulping Waste Liquid on the Physicochemical Properties and the Prediction Model of Wheat Straw Residue Granular Fuels |
| 2024-03-19 |
(Micro-)Plastics in Saturated and Unsaturated Groundwater Bodies: First Evidence of Presence in Groundwater Fauna and Habitats |
| 2024-03-18 |
The Effects of Microcrystalline Cellulose Addition on the Properties of Wood–PLA Filaments for 3D Printing |
| 2024-03-18 |
Aquatic biodegradation of poly(?-hydroxybutyrate) in polylactic acid and maleic anhydride blended fibers |
| 2024-03-18 |
Augmenting the Efficacy of a Polyvinyl Alcohol Selective Layer Coated on Polyvinylidene Fluoride Support Membranes with Kaolinite Introduction for Improved Pervaporation Dehydration of Epichlorohydrin/Isopropanol/Water Ternary Systems |
| 2024-03-18 |
Particle Size of Calcium Hydroxide Prepared by Wet Digestion: Influencing Factors and Mechanism |
| 2024-03-18 |
Sustainable composites with self?healing capability: Epoxidized natural rubber and cellulose propionate reinforced with cellulose fibers |
| 2024-03-17 |
Toward the production of biopolyethylene?based ecocomposites with improved performance: The potential of eggshell particles as an ecological additive |
| 2024-03-17 |
Flexible, chemically bonded bismuth/tungsten?based polyvinyl alcohol?polyvinyl pyrrolidone composite for gamma and neutron shielding application |
| 2024-03-17 |
Surface Durability of 3D-Printed Polymer Gears |
| 2024-03-17 |
Colorimetric Indicator Based on Gold Nanoparticles and Sodium Alginate for Monitoring Fish Spoilage |
| 2024-03-17 |
Strategies for the fast optimization of the glass transition temperature of sustainable epoxy resin systems via machine learning |
| 2024-03-16 |
Crystallinity and mechanical properties of polypropylene products foamed by microcellular injection molding process |
| 2024-03-16 |
Pure chitosan multifilament yarns made using a semi?industrial pilot scale wet?spinning process with ionic liquids |
| 2024-03-15 |
Recent trends in the development of Polyhydroxyalkanoates (PHAs) based biocomposites by blending with different bio-based polymers |
| 2024-03-15 |
Synthesis and characterization of foams generated via gel state frontal polymerization |
| 2024-03-15 |
Environmentally Friendly Bleaching Process of the Cellulose Fibres Materials Using Ozone and Hydrogen Peroxide in the Gas Phase |
| 2024-03-15 |
Enhanced Corrosion Resistance and Mechanical Durability of the Composite PLGA/CaP/Ti Scaffolds for Orthopedic Implants |
| 2024-03-15 |
Improvement of mechanical and thermal expansion properties of pectinase treatment plant fiber reinforced starch/PBAT composites |
| 2024-03-14 |
Mechanical Properties of Lattice Structures with a Central Cube: Experiments and Simulations |
| 2024-03-14 |
Simulation of Starch Gel Printing and Deformation Process Using COMSOL |
| 2024-03-14 |
Bioinspired Thermal Conductive Cellulose Nanofibers/Boron Nitride Coating Enabled by Co-Exfoliation and Interfacial Engineering |
| 2024-03-14 |
Lignin-Based Hydrogels for the Delivery of Bioactive Chaga Mushroom Extract |
| 2024-03-14 |
Effect of Modified Natural Rubber on the Mechanical and Thermal Properties of Poly(Lactic Acid) and Its Composites with Nanoparticles from Biowaste |
| 2024-03-14 |
Effect of Iron Chloride Addition on Softwood Lignin Nano-Fiber Stabilization and Carbonization |
| 2024-03-14 |
Revalorization of Yerba Mate Residues: Biopolymers-Based Films of Dual Wettability as Potential Mulching Materials |
| 2024-03-14 |
Enhancement of mechanical and thermal properties of UV?curable wood coatings by cellulose nanofibrils and carboxylated organo?montmorillonite |
| 2024-03-13 |
Biodegradable flexible conductive film based on sliver nanowires and PLA electrospun fibers |
| 2024-03-13 |
Foaming of 3D-Printed PLA/CaCO3 Composites by Supercritical CO2 Process for Sustainable Food Contact Materials |
| 2024-03-13 |
Delivery of Probiotics with Cellulose-Based Films and Their Food Applications |
| 2024-03-13 |
Effect of Resin Content on the Structure, Water Resistance and Mechanical Properties of High-Density Bamboo Scrimbers |
| 2024-03-12 |
Environmental Durability of Bio-Based and Synthetic Thermoplastic Composites in Large-Format Additive Manufacturing |
| 2024-03-12 |
Effects of carbon?based nanoparticles on the properties of poly(lactic acid) hybrid composites containing basalt fibers and carbon?based nanoparticles processed by injection molding |
| 2024-03-12 |
Improving stability of human three dimensional skin equivalents using plasma surface treatment |
| 2024-03-12 |
Enhancing short?chain fatty acids production via acidogenic fermentation of municipal sewage sludge: Effect of sludge characteristics and peroxydisulfate pre?oxidation |
| 2024-03-12 |
Polyols and polyurethane foams based on chitosans of various molecular weights |
| 2024-03-12 |
Functionalized hydroxypropyl???cyclodextrin derivative as a versatile nanovehicle for delivery of paclitaxel |
| 2024-03-12 |
Fusedly Deposited Frequency-Selective Composites Fabricated by a Dual-Nozzle 3D Printing as Microwave Filter |
| 2024-03-12 |
A Review of the Strategic Use of Sodium Alginate Polymer in the Immobilization of Microorganisms for Water Recycling |
| 2024-03-12 |
Recent Progress in Cellulose Hydrophobization by Gaseous Plasma Treatments |
| 2024-03-12 |
Sustainable Production of Carboxymethyl Cellulose: A Biopolymer Alternative from Sugarcane (Saccharum officinarum L.) Leaves |
| 2024-03-12 |
Biodegradable Polymer Films: Processability, Technological Properties and Their Viability for Flexible Packaging Applications |
| 2024-03-11 |
From Fields to Films: Exploring Starch from Agriculture Raw Materials for Biopolymers in Sustainable Food Packaging |
| 2024-03-11 |
Wheat bran extract as a source of amino compounds and sugar for biotech processes |
| 2024-03-10 |
Facile Synthesis of Dual-Network Polymer Hydrogels with Anti-Freezing, Highly Conductive, and Self-Healing Properties |
| 2024-03-10 |
Impact of Metal Salt Oxidants and Preparation Technology on Efficacy of Bacterial Cellulose/Polypyrrole Flexible Conductive Fiber Membranes |
| 2024-03-09 |
Silk?Fabric Reinforced Silk for Artificial Bones |
| 2024-03-09 |
Characterization of hemicellulose?carboxymethyl cellulose blend films: Enhancement of the physicochemical, thermal, and mechanical properties |
| 2024-03-09 |
Polymorphisms of PDCD1 and COL9A1 Genes in Plaque, Palmoplantar and Arthropathic Psoriasis in Romanian Patients |
| 2024-03-09 |
Influence of Low-Molecular-Weight Esters on Melt Spinning and Structure of Poly(lactic acid) Fibers |
| 2024-03-09 |
Influence of Choline Chloride/Urea and Glycerol Plasticizers on the Mechanical Properties of Thermoplastic Starch Plastics |
| 2024-03-09 |
Maltodextrin-Based Cross-Linked Electrospun Mats as Sustainable Sorbents for the Removal of Atenolol from Water |
| 2024-03-09 |
Reactive Deep Eutectic Solvent for an Eco-Friendly Synthesis of Cellulose Carbamate |
| 2024-03-08 |
Fabrication of a Controlled-Release Core-Shell Floating Tablet of Ketamine Hydrochloride Using a 3D Printing Technique for Management of Refractory Depressions and Chronic Pain |
| 2024-03-08 |
Epoxidized technical Kraft lignin as a particulate resin component for high-performance anticorrosive coatings |
| 2024-03-08 |
Energy storage enabled by cross-linked multilayer films using block copolymer-modified nanocapsules and chitosan biopolymers |
| 2024-03-08 |
The Influence of Urtica dioica and Vitis vinifera Fibers on the Thermal Properties and Flammability of Polylactide Composites |
| 2024-03-08 |
Modeling Xanthan Gum Foam’s Material Properties Using Machine Learning Methods |
| 2024-03-08 |
Modification and Development of the Structural, Morphological and Dielectric Characteristics of Polyvinyl Alcohol Incorporated with Cerium Dioxide / Silicon Carbide Nanoparticles for Nanodielectric and Nanoelectronic Applications |
| 2024-03-07 |
Lignosulfonate/silica hybrid nanoparticles as a novel biobased filler in polybenzoxazine matrix |
| 2024-03-07 |
Designing Lightweight 3D-Printable Bioinspired Structures for Enhanced Compression and Energy Absorption Properties |
| 2024-03-07 |
Alginate Silver Nanoparticles and Their Effect on Sperm Parameters of the Domestic Rabbit |
| 2024-03-07 |
Bread Improvement with Nutraceutical Ingredients Obtained from Food By-Products: Effect on Quality and Technological Aspects |
| 2024-03-07 |
A Novel Method of Synthesizing Polymeric Aluminum Ferric Sulfate Flocculant and Preparing Red Mud-Based Ceramsite |
| 2024-03-07 |
Cellulose Nanofibrils-Reinforced Pectin Membranes for the Adsorption of Cationic Dyes from a Model Solution |
| 2024-03-07 |
Development of Sustainable and Active Food Packaging Materials Composed by Chitosan, Polyvinyl Alcohol and Quercetin Functionalized Layered Clay |
| 2024-03-07 |
Facile Preparation of Cellulose Beads with Tunable Graded Pores and High Mechanical Strength |
| 2024-03-07 |
Development of Hydroxyapatite/Polycaprolactone Composite Biomaterials for Laser Powder Bed Fusion: Evaluation of Powder Characteristics, Mechanical Properties and Biocompatibility |
| 2024-03-07 |
Highly Thermally Conductive Triple-Level Ordered CNT/PVA Nanofibrous Films |
| 2024-03-07 |
Decontamination of methylene blue from aqueous media using alginate?bonded polyacrylamide/carbon black nanocomposite hydrogel |
| 2024-03-06 |
Biocompatible colloidal feedstock for material extrusion processing of bioceramic?based scaffolds |
| 2024-03-06 |
Viability Study of Serra da Estrela Dog Wool to Produce Green Composites |
| 2024-03-06 |
Experimental investigation of regenerated cellulose microdialysis probe sterilization |
| 2024-03-06 |
Enhancement of crystallization and adjustment properties for biocompatible poly(lactide)-based thermoplastic polyurethane via stereocomplexation |
| 2024-03-06 |
Synergistic Effect of Carbon Micro/Nano-Fillers and Surface Patterning on the Superlubric Performance of 3D-Printed Structures |
| 2024-03-06 |
Copper-Containing Bionanocomposites Based on Natural Raw Arabinogalactan as Effective Vegetation Stimulators and Agents against Phytopathogens |
| 2024-03-06 |
The Structural, Thermal and Morphological Characterization of Polylactic Acid/Β-Tricalcium Phosphate (PLA/Β-TCP) Composites upon Immersion in SBF: A Comprehensive Analysis |
| 2024-03-06 |
Carboxymethylated and Sulfated Furcellaran from Furcellaria lumbricalis and Its Immobilization on PLA Scaffolds |
| 2024-03-06 |
Self?healing waterborne fluorinated polyurethane?acrylate based on photo?reversible reaction and hydrogen bond |
| 2024-03-05 |
Enzyme-Assisted Circular Additive Manufacturing as an Enabling Technology for a Circular Bioeconomy—A Conceptual Review |
| 2024-03-05 |
Comparative Study of Polymer Composites with Cellulose Microfibers from Different Plant Resources |
| 2024-03-05 |
A New Lotus-Leaf-Inspired Beaded Nanofiber Strategy for the Development of Cryogel/Nanofiber Hybrid Structures |
| 2024-03-05 |
Molecular design and hygrothermal resistance of high?toughness polysiloxane–polyurethane block copolymer composite adhesives |
| 2024-03-05 |
Facile synthesis of rapamycin?loaded PEG?b?PLA nanoparticles and their application in immunotherapy |
| 2024-03-05 |
Biodegradable zwitterionic polymers as PEG alternatives for drug delivery |
| 2024-03-05 |
Feasibility of Invasive Brown Seaweed Rugulopteryx okamurae as Source of Alginate: Characterization of Products and Evaluation of Derived Gels |
| 2024-03-05 |
Highly Permeable Ultrafiltration Membranes Based on Polyphenylene Sulfone with Cardo Fragments |
| 2024-03-05 |
Catalyzed Hydrothermal Pretreatment of Oat Husks for Integrated Production of Furfural and Lignocellulosic Residue |
| 2024-03-05 |
Tailoring Pectin-PLA Bilayer Film for Optimal Properties as a Food Pouch Material |
| 2024-03-05 |
Protective Effects of Carbonated Chitosan Montmorillonite on Vomitoxin-Induced Intestinal Inflammation |
| 2024-03-05 |
Recent advances in biopolymer based electrospun nanomaterials for drug delivery systems |
| 2024-03-05 |
Effects of solvent casted poly (lactic acid)/poly(ethylene glycol)/paraben derivative triazine films on antibacterial performance and cytotoxicity |
| 2024-03-05 |
The role of poly(3?hydroxybutyrate)?based derivatives in skin, nerve, cartilage, and bone tissue engineering applications—An updated review |
| 2024-03-05 |
Electrospray doxorubicin?loaded polycaprolactone?polyethylene glycol nanospheres/poloxamer?chitosan thermogel: A promising candidate for clinical applications |
| 2024-03-04 |
Surface?methacrylated microcrystalline cellulose bioresins with soybean oil for additive manufacturing via vat photopolymerization |
| 2024-03-03 |
Water?Doped Brønsted Acidic Protic Ionic Liquids for Enhanced Tributyl Citrate Synthesis in a Two?Phase Esterification System |
| 2024-03-03 |
Compound Microalgae-Type Biofunctional Hydrogel for Wound Repair during Full-Thickness Skin Injuries |
| 2024-03-02 |
Targeting Bacterial Nanocellulose Properties through Tailored Downstream Techniques |
| 2024-03-02 |
Crosslinked Polyesters as Fully Biobased Coatings with Cutin Monomer from Tomato Peel Wastes |
| 2024-03-02 |
Carbon-Based Composites with Biodegradable Matrix for Flexible Paper Electronics |
| 2024-03-02 |
Stabilization of Black Locust Flower Extract via Encapsulation Using Alginate and Alginate–Chitosan Microparticles |
| 2024-03-02 |
Nanocrystalline Cellulose-Supported Iron Oxide Composite Materials for High-Performance Lithium-Ion Batteries |
| 2024-03-02 |
Biopolymer composites based on ultrasound/plasma?modified fiber waste and polybutylene adipate terephthalate (PBAT): Physicochemical and functional performance |
| 2024-03-01 |
Cryostructuring of Polymeric Systems: 67 Properties and Microstructure of Poly(Vinyl Alcohol) Cryogels Formed in the Presence of Phenol or Bis-Phenols Introduced into the Aqueous Polymeric Solutions Prior to Their Freeze–Thaw Processing |
| 2024-03-01 |
A Design Strategy for Removing the Debinding and Sintering Gas in Additive Manufactured Samples of a Bronze/Polylactic Acid Filament |
| 2024-03-01 |
Gold Nanoparticles-Incorporated Electrospun Nanofibrous Membrane for Optical Biosensing Applications: An Experimental and Computational Approach |
| 2024-03-01 |
Physical Stability of Lotus Seed and Lily Bulb Beverage: The Effects of Homogenisation on Particle Size Distribution, Microstructure, Rheological Behaviour, and Sensory Properties |
| 2024-03-01 |
Thermal and Sound Insulation Properties of Organic Biocomposite Mixtures |
| 2024-03-01 |
Electrospun PCL Filtration Membranes Enhanced with an Electrosprayed Lignin Coating to Control Wettability and Anti-Bacterial Properties |
| 2024-02-29 |
Impact Fracture Resistance of Fused Deposition Models from Polylactic Acid with Respect to Infill Density and Sample Thickness |
| 2024-02-28 |
Encapsulation and Characterization of Proanthocyanidin Microcapsules by Sodium Alginate and Carboxymethyl Cellulose |
| 2024-02-28 |
Extraction of Lightweight Platanus orientalis L. Fruit’s Stem Fiber and Determination of Its Mechanical and Physico-Chemical Properties and Potential of Its Use in Composites |
| 2024-02-28 |
Properties of polylactic acid blends with potato thermoplastic starch using maleated polyethylene as a compatibilizer |
| 2024-02-28 |
Synthesis of innovative epoxy resin and polyamine hardener microcapsules and their age monitoring by confocal Raman imaging |
| 2024-02-28 |
Sophorolipid?mediated green synthesis of silver nanoparticles for antimicrobial starch nanocomposite films |
| 2024-02-28 |
Progress in the design principle of biomedical tissue adhesive hydrogel with naturally derived substance |
| 2024-02-28 |
Chitosan-Caffeic Acid Antibacterial Coating for PDMS Surfaces: A Sustained Moxifloxacin Release and Prolonged Coating Adhesion |
| 2024-02-28 |
The Effect of Stereocomplexation and Crystallinity on the Degradation of Polylactide Nanoparticles |
| 2024-02-28 |
Evaluating the Incorporation of Myrtus communis L. Leaves Infusion in Alginate-Based Films and Spheres to Enhance the Oxidative Stability of Oil-in-Water Emulsions |
| 2024-02-28 |
Reproducible Polybutylene Succinate (PBS)-Degrading Artificial Consortia by Introducing the Least Type of PBS-Degrading Strains |
| 2024-02-28 |
Reshaping antibiotic delivery: Chitosan?based polymeric hydrogel for transdermal treatment of drug resistant bacteria |
| 2024-02-27 |
Retention of Ciprofloxacin and Carbamazepine from Aqueous Solutions Using Chitosan-Based Cryostructured Composites |
| 2024-02-27 |
Design of Sustainable Aluminium-Based Feedstocks for Composite Extrusion Modelling (CEM) |
| 2024-02-27 |
Mechanochemical Encapsulation of Caffeine in UiO-66 and UiO-66-NH2 to Obtain Polymeric Composites by Extrusion with Recycled Polyamide 6 or Polylactic Acid Biopolymer |
| 2024-02-27 |
Vanillin-based degradable thermosets with superior dielectric properties via regulation of imine cross-linked structure |
| 2024-02-27 |
High molecular weight crystalline PEO6?based polymer electrolytes for lithium?ion conduction—Effect of cellulose nanowhiskers |
| 2024-02-27 |
High efficacy fluconazole loaded ZnO?poly (vinyl alcohol) nanocomposite: Interpretive breakpoints for biological applications |
| 2024-02-27 |
Polyolefin-Based Smart Self-Healing Composite Coatings Modified with Calcium Carbonate and Sodium Alginate |
| 2024-02-27 |
Chitosan/Virgin Coconut Oil-Based Emulsions Doped with Photosensitive Curcumin Loaded Capsules: A Functional Carrier to Topical Treatment |
| 2024-02-27 |
Functionalized nanocellulose as a bifunctional material for efficient adsorption of mercuric ions with antimicrobial properties |
| 2024-02-26 |
Biotechnological Utilization of Agro-Industrial Residues and By-Products—Sustainable Production of Biosurfactants |
| 2024-02-26 |
Influence of a Biofiller, Polylactide, on the General Characteristics of Epoxy-Based Materials |
| 2024-02-26 |
Kinetics Study of PVA Polymer by Model-Free and Model-Fitting Methods Using TGA |
| 2024-02-26 |
Electrical Conduction Mechanisms in Ethyl Cellulose Films under DC and AC Electric Fields |
| 2024-02-26 |
Study on mechanical, thermal and shape memory properties of polycarbonate/thermoplastic polyurethane blends |
| 2024-02-26 |
Electrically conductive bioplastics based on chitosan, polyvinyl alcohol, polyvinyl pyrrolidone, and plant extract nanoparticles for detecting Rhizopus stolonifer on tomato fruit |
| 2024-02-26 |
Studies on structural, dielectric and charge transport properties of PVA:LiBr solid polymer electrolyte films |
| 2024-02-26 |
Quantitative investigation on the Young's modulus of ultrathin amorphous PS films attached to different substrates |
| 2024-02-26 |
Polymer/iron oxide nanocomposites as magnetic resonance imaging contrast agents: Polymer modulation and probe property control |
| 2024-02-25 |
Intermediate product control in cascade reaction for one?pot production of ??caprolactone by Escherichia coli |
| 2024-02-25 |
Secretory production and characterization of a highly effective chitosanase from Streptomyces coelicolor A3(2) M145 in Pichia pastoris |
| 2024-02-25 |
Porous and Dense Alginate/Chitosan Composite Films Loaded with Simvastatin for Dressing Applications |
| 2024-02-25 |
Zein Multilayer Electrospun Nanofibers Contain Essential Oil: Release Kinetic, Functional Effectiveness, and Application to Fruit Preservation |
| 2024-02-25 |
Synthesis of L-Lactide from Lactic Acid and Production of PLA Pellets: Full-Cycle Laboratory-Scale Technology |
| 2024-02-25 |
Natural Extracts and Their Applications in Polymer-Based Active Packaging: A Review |
| 2024-02-25 |
Nitrogen Plasma Treatment of Composite Materials Based on Polylactic Acid and Hydroxyapatite |
| 2024-02-25 |
Preparation and characterization of carboxymethyl cellulose/polyethylene glycol films containing bromelain/curcumin: In vitro evaluation of wound healing activity |
| 2024-02-24 |
Development of poly(butylene adipate?co?terephthalate) composites with high thermal oxidation stability using Chrysanthemum morifolium extract as a natural additive |
| 2024-02-24 |
Curcumin – Bioavailability Enhancement by Prodrug Approach and Novel Formulations |
| 2024-02-24 |
Photooxidation?induced conformational changes and degradation behaviors of poly(butylene succinate) and poly(butylene succinate?co?adipate) |
| 2024-02-24 |
Investigation of the Hydrolytic Degradation Kinetics of 3D-Printed PLA Structures under a Thermally Accelerated Regime |
| 2024-02-24 |
Accelerated Weathering Testing (AWT) and Bacterial Biodegradation Effects on Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV)/Rapeseed Microfiber Biocomposites Properties |
| 2024-02-24 |
NMR Analyses and Statistical Modeling of Biobased Polymer Microstructures—A Selected Review |
| 2024-02-24 |
Graft copolymers of collagen and acrylic monomers—Reagents for sizing of cotton yarn |
| 2024-02-23 |
A Comparative Investigation of the Reliability of Biodegradable Components Produced through Additive Manufacturing Technology |
| 2024-02-23 |
Photosynthetic nano fibers: Living microalgae packaging into polyvinyl alcohol nanofibers using an electrospinning method |
| 2024-02-23 |
Impact of Corn Starch Molecular Structures on Texture, Water Dynamics, Microstructure, and Protein Structure in Silver Carp (Hypophthalmichthys molitrix) Surimi Gel |
| 2024-02-23 |
Algae-Based Biopolymers for Batteries and Biofuel Applications in Comparison with Bacterial Biopolymers—A Review |
| 2024-02-23 |
Computational Analysis of the Tripartite Interaction of Phasins (PhaP4 and 5)-Sigma Factor (σ24)-DNA of Azospirillum brasilense Sp7 |
| 2024-02-23 |
Study on mechanical properties of vacuum?infused glass fiber reinforced thermoplastic methacrylic resin composites |
| 2024-02-23 |
Recent advances and challenges in thermal stability of PVA?based film: A review |
| 2024-02-22 |
Influence of functionalised lignin on strength and antioxidant properties of polylactic acid films |
| 2024-02-22 |
Bactericidal Biodegradable Linear Polyamidoamines Obtained with the Use of Endogenous Polyamines |
| 2024-02-22 |
Recycled Waste as Polyurethane Additives or Fillers: Mini-Review |
| 2024-02-22 |
Biopolymer?based coatings for anti?corrosion of Ti?alloys used in biomedical applications: A review |
| 2024-02-22 |
Solid polymer nanocomposite electrolytes based on poly(??caprolactone)?based waterborne polyurethane–polyethylene oxide and fluorine?doped carbon quantum dot?MXene |
| 2024-02-22 |
Effects of synthesis temperature on structures and properties of epoxidized soybean oil oligomers and starch?based bioplastics |
| 2024-02-21 |
A review on polylactic acid?based blends/composites and the role of compatibilizers in biomedical engineering applications |
| 2024-02-21 |
Kinetic migration of PBS and PBSA biopolymers prepared by cast film extrusion and biaxial stretching: A combined experimental and modeling approach |
| 2024-02-21 |
Linear sensing actuators of polypyrrole nanofiber scaffolds |
| 2024-02-21 |
Orthogonal synthesis and modification of hyperbranched polymers via different colors of light |
| 2024-02-21 |
Highly Efficient Biosorption of Cationic Dyes via Biopolymeric Adsorbent-Material-Based Pectin Extract Polysaccharide and Carrageenan Grafted to Cellulosic Nonwoven Textile |
| 2024-02-21 |
Hygroscopy as an Indicator of Specific Surface Area in Polymer Materials |
| 2024-02-21 |
Functionalization Methods of Starch and Its Derivatives: From Old Limitations to New Possibilities |
| 2024-02-21 |
Ring?opening polymerization of l?lactide in the presence of ??hydroxy???butyrolactone |
| 2024-02-20 |
Preparation and characterization of green?based anti?ultraviolet and antidripping biodegradable film |
| 2024-02-20 |
Thermal degradation behavior and kinetics of porous polymer based on high functionality components |
| 2024-02-20 |
Innovative environment-friendly liquid fertilizer bead from sodium alginate coating with IPN membrane derived from natural rubber and cassava starch |
| 2024-02-20 |
New Biodegradable Copolymers Based on Betulin and Hydroxycarboxylic Acid Derivatives |
| 2024-02-20 |
Biobased Films Based on Chitosan and Microcrystalline Cellulose for Sustainable Packaging Applications |
| 2024-02-20 |
Subcutaneous Application of a Gelatin/Hyaluronic Acid Hydrogel Induces the Production of Skin Extracellular Matrix |
| 2024-02-20 |
Biodegradability Study of Modified Chitosan Films with Cinnamic Acid and Ellagic Acid in Soil |
| 2024-02-19 |
Strong, self-healing and flame-retardant elastomer composite based on epoxidized natural rubber, polylactic acid, chitosan and guanidine phosphate |
| 2024-02-19 |
Evaluation of Recycled Paperboard Properties and Characteristics |
| 2024-02-19 |
Agro-Waste Sweet Pepper Extract-Magnetic Iron Oxide Nanoparticles for Antioxidant Enrichment and Sustainable Nanopackaging |
| 2024-02-19 |
Photopolymerization Pattern of New Methacrylate Cellulose Acetate Derivatives |
| 2024-02-18 |
Kraft (Nano)Lignin as Reactive Additive in Epoxy Polymer Bio-Composites |
| 2024-02-18 |
Sustainable Innovation: Fabrication and Characterization of Mycelium-Based Green Composites for Modern Interior Materials Using Agro-Industrial Wastes and Different Species of Fungi |
| 2024-02-18 |
Cellulose Acetate–Ionic Liquid Blends as Potential Polymers for Efficient CO2 Separation Membranes |
| 2024-02-17 |
Splitting Tensile Test of ECC Functional Gradient Concrete with PVA Fiber Admixture |
| 2024-02-17 |
Characterization of flexural and compressive behavior in polylactic acid composites for low?cost transtibial prosthetic applications: Influence of reinforcements |
| 2024-02-17 |
Gallic acid crosslinked peanut protein?corn starch composite edible films produced at alkaline pH with ultrasound application |
| 2024-02-17 |
Promising growth inhibitory potential of extracted natural silk sericin biopolymer against DEN?induced liver tumor in male mice |
| 2024-02-17 |
Morphological evolution and property changes of acrylate rubber/polyacetal thermoplastic vulcanizates during dynamic vulcanization process |
| 2024-02-17 |
Repairing Performance of Polymer-Modified Cement-Based Thin Spray-On Liners on Pre-Cracked Rock-like Specimens |
| 2024-02-17 |
Silver-Sulfamethazine-Conjugated β-Cyclodextrin/Dextran-Coated Magnetic Nanoparticles for Pathogen Inhibition |
| 2024-02-17 |
Preparation, shape memory properties and application research of PLA/PCL?based shape memory polymers doped with Al2O3 and lignin |
| 2024-02-16 |
Cellulose/Polyhydroxybutyrate (PHB) Composites as a Sustainable Bio-Based Feedstock to 3D-Printing Applications |
| 2024-02-16 |
Exploring Novel Applications for Hydrogels Derived from Modified Celluloses |
| 2024-02-16 |
Advanced Bioresin Formulation for 3D-Printed Bone Scaffolds: PCLDMA and p-PLA Integration |
| 2024-02-15 |
Activity of a Recombinant Chitinase of the Atta sexdens Ant on Different Forms of Chitin and Its Fungicidal Effect against Lasiodiplodia theobromae |
| 2024-02-15 |
Degradation of Mechanical Properties of Flax/PLA Composites in Hygrothermal Aging Conditions |
| 2024-02-15 |
Electrospun Polycaprolactone Membranes Expanded with Chitosan Granules for Cell Infiltration |
| 2024-02-15 |
Production of Chemically Modified Bio-Based Wood Adhesive from Camote and Cassava Peels |
| 2024-02-15 |
Study of the matrix–particle interactions of polymer nanocomposites in the low?frequency regime |
| 2024-02-14 |
Aggregate Removal by Responsive Electrospun Membrane based Hydrophobic Interaction Chromatography |
| 2024-02-14 |
Use of Electrospinning for Sustainable Production of Nanofibers: A Comparative Assessment of Smart Textiles-Related Applications |
| 2024-02-14 |
Polyvinyl Alcohol, a Versatile Excipient for Pharmaceutical 3D Printing |
| 2024-02-14 |
Ductile Copolyesters Prepared Using Succinic Acid, 1,4-Butanediol, and Bis(2-hydroxyethyl) Terephthalate with Minimizing Generation of Tetrahydrofuran |
| 2024-02-14 |
Enhanced Mechanical Properties of Polylactic Acid/Poly(Butylene Adipate-co-Terephthalate) Modified with Maleic Anhydride |
| 2024-02-14 |
Enhancing Mechanical Performance of High-Lignin-Filled Polypropylene via Reactive Extrusion |
| 2024-02-13 |
Effect of Silver Nanoparticles Finishing on Dyeing Properties of Newly Synthesized Reactive Dye Applied on Cellulosic Fabric |
| 2024-02-13 |
Biodegradable surfactants do not improve antifouling or fouling-release performance of polydimethylsiloxane |
| 2024-02-13 |
Chitosan-Based Structural Color Films for Humidity Sensing with Antiviral Effect |
| 2024-02-13 |
Enhancing the Hydrolytic Stability of Poly(lactic acid) Using Novel Stabilizer Combinations |
| 2024-02-13 |
Synthesis of a Rivastigmine and Insulin Combinational Mucoadhesive Nanoparticle for Intranasal Delivery |
| 2024-02-13 |
Thermal and mechanical properties of aminolyzed?poly(lactic acid) with amine?terminated dendritic polymer: Surface and bulk functionalization |
| 2024-02-12 |
Tuning the properties of polycaprolactone-based fibers by using polyethylene oxide / polycaprolactone block copolymers |
| 2024-02-12 |
ZIF67-ZIF8@MFC-Derived Co-Zn/NC Interconnected Frameworks Combined with Perfluorosulfonic Acid Polymer as a Highly Efficient and Stable Composite Electrocatalyst for Oxygen Reduction Reactions |
| 2024-02-12 |
A Tale of Two Chains: Geometries of a Chain Model and Protein Native State Structures |
| 2024-02-12 |
Research Advances in Superabsorbent Polymers |
| 2024-02-11 |
Preparation of light?responsive block copolymer modified cellulose nanocrystal@polydopamine particle and its application in fluorinated polyacrylate film |
| 2024-02-11 |
Large?scale artificial production of Coleoptera cuticle iridescence and its use in conformal biodegradable coatings |
| 2024-02-11 |
New insights into Chlorella vulgaris applications |
| 2024-02-11 |
Synthesis of robust and transparent poly(butenyl sorbate) membrane for separation of carbon dioxide/methane |
| 2024-02-11 |
Preparation and properties of cellulose nanofiber/Ti3C2Tx/Poly(lactic acid) composite film |
| 2024-02-11 |
Mechanical Properties and Degradation Rate of Poly(sorbitol adipate-co-dioladipate) Copolymers Obtained with a Catalyst-Free Melt Polycondensation Method |
| 2024-02-11 |
Three-Dimensional Bioprinting of Strontium-Modified Controlled Assembly of Collagen Polylactic Acid Composite Scaffold for Bone Repair |
| 2024-02-11 |
Novel PVA–Hyaluronan–Siloxane Hybrid Nanofiber Mats for Bone Tissue Engineering |
| 2024-02-10 |
Feasibility study on thermo?mechanical performance of 3D printed and annealed coir fiber powder/polylactic acid eco?friendly biocomposites |
| 2024-02-10 |
Sustainable Biocomposites: Harnessing the Potential of Waste Seed-Based Fillers in Eco-Friendly Materials |
| 2024-02-10 |
Experimental Thermal Conductivity Studies of Agar-Based Aqueous Suspensions with Lignin Magnetic Nanocomposites |
| 2024-02-10 |
Selection of matrix material for hydrogel carriers of plant micronutrients |
| 2024-02-10 |
Colorimetric Films Based on Polyvinyl Alcohol and Anthocyanins Extracted from Purple Tomato to Monitor the Freshness of Shrimp |
| 2024-02-09 |
Application of Tamarind Shell as a Green Additive in Natural Rubber |
| 2024-02-09 |
Flexural Properties of Additively Manufactured Structures Reinforced with Cellular and Fractal Patterns |
| 2024-02-09 |
Recent Progress of Biodegradable Polymer Package Materials: Nanotechnology Improving Both Oxygen and Water Vapor Barrier Performance |
| 2024-02-09 |
PVA-Based Films with Strontium Titanate Nanoparticles Dedicated to Wound Dressing Application |
| 2024-02-09 |
Topographically and Chemically Enhanced Textile Polycaprolactone Scaffolds for Tendon and Ligament Tissue Engineering |
| 2024-02-09 |
Electrical Conductivity and EMI Shielding Efficiency of PPY-PVA-Ni Nanocomposite Films |
| 2024-02-09 |
Fabrication and Evaluation the Optical and Dielectric Characteristics of Promising PVA-ZrC-SiO2 Nanocompsites Films |
| 2024-02-08 |
An Overview of Biopolymers for Drug Delivery Applications |
| 2024-02-08 |
Using Natural Dye Additives to Enhance the Energy Conversion Performance of a Cellulose Paper-Based Triboelectric Nanogenerator |
| 2024-02-08 |
Advancing Molecular Weight Determination of Lignin by Multi-Angle Light Scattering |
| 2024-02-08 |
The Influence of TiO2–Lignin Hybrid Fillers in Low-Density Polyethylene Composites on Photocatalytic Performance and UV-Barrier Properties |
| 2024-02-08 |
Chitosan-Based Nanoencapsulated Essential Oils: Potential Leads against Breast Cancer Cells in Preclinical Studies |
| 2024-02-08 |
Hydrogel Based on Chitosan/Gelatin/Poly(Vinyl Alcohol) for In Vitro Human Auricular Chondrocyte Culture |
| 2024-02-08 |
Synthesis of Poly-Lactic Acid by Ring Open Polymerization from Beer Spent Grain for Drug Delivery |
| 2024-02-08 |
Rheological and Flexural Strength Characteristics of Cement Mixtures through the Synergistic Effects of Graphene Oxide and PVA Fibers |
| 2024-02-08 |
Assessing the degradation profiles of a thermoresponsive polyvinyl alcohol (PVA)?based hydrogel for biomedical applications |
| 2024-02-07 |
Compatibilization of poly(methyl methacrylate) and cellulose nanocrystals through co?continuous phase to enhance the thermomechanical properties |
| 2024-02-07 |
Effect of acrylic acid on water?whitening resistance of polyacrylate latex films and its mechanism |
| 2024-02-07 |
Fabrication of hydrophobic coatings on paper substrates using silicone oil impregnated silica: a promising sustainable packaging material |
| 2024-02-07 |
Optimization of Charpy Impact Strength of Tough PLA Samples Produced by 3D Printing Using the Taguchi Method |
| 2024-02-07 |
Enhancing Chitosan Fibers: A Dual Approach with Tripolyphosphate and Ursolic Acid |
| 2024-02-07 |
Synthesis of Network Biobased Aliphatic Polyesters Exhibiting Better Tensile Properties than the Linear Polymers by ADMET Polymerization in the Presence of Glycerol Tris(undec-10-enoate) |
| 2024-02-07 |
Effects of Synthesis Parameters on Structure and Antimicrobial Properties of Bacterial Cellulose/Hydroxyapatite/TiO2 Polymer–Ceramic Composite Material |
| 2024-02-06 |
Glycyrrhetinic acid alleviates atrial fibrillation by inhibiting the expression of PIM1 |
| 2024-02-06 |
Smart and UV-Resistant Edible Coating and Films Based on Alginate, Whey Protein, and Curcumin |
| 2024-02-06 |
Hybrid-Aligned Fibers of Electrospun Gelatin with Antibiotic and Polycaprolactone Composite Membranes as an In Vitro Drug Delivery System to Assess the Potential Repair Capacity of Damaged Cornea |
| 2024-02-06 |
Sustainable Composites Containing Post-Production Wood Waste as a Key Element of the Circular Economy: Processing and Physicochemical Properties |
| 2024-02-06 |
Effect of carbon black and chain extender on thermal, rheological and mechanical properties of full biodegradable PBAT/P34HB blends |
| 2024-02-05 |
Development and Characterisation of Composites Prepared from PHBV Compounded with Organic Waste Reinforcements, and Their Soil Biodegradation |
| 2024-02-05 |
Effect of the solid content of spinning solutions on the structure properties of large-diameter polyvinyl alcohol fiber |
| 2024-02-05 |
Machine Learning Backpropagation Prediction and Analysis of the Thermal Degradation of Poly (Vinyl Alcohol) |
| 2024-02-05 |
Synthesis, Characterization, and Evaluation of the Adsorption Behavior of Cellulose-Graft-Poly(Acrylonitrile-co-Acrylic Acid) and Cellulose-Graft-Poly(Acrylonitrile-co-Styrene) towards Ni(II) and Cu(II) Heavy Metals |
| 2024-02-05 |
Wastewater Treatment Using Membrane Bioreactor Technologies: Removal of Phenolic Contaminants from Oil and Coal Refineries and Pharmaceutical Industries |
| 2024-02-05 |
Dialdehyde polyethylene glycol cross?linked poly(vinyl alcohol) membranes with enhanced CO2/N2 separation performance |
| 2024-02-04 |
The effect of antimicrobial peptide HX?12C on the properties of chitosan/polyacrylic acid hydrogel |
| 2024-02-04 |
Comprehensive Analysis of Rheological, Mechanical, and Thermal Properties in Poly(lactic acid)/Oxidized Graphite Composites: Exploring the Effect of Heat Treatment on Elastic Modulus |
| 2024-02-04 |
Water-Based Generators with Cellulose Acetate: Uncovering the Mechanisms of Power Generation |
| 2024-02-04 |
Preparation of PLGA Microspheres Using the Non-Toxic Glycofurol as Polymer Solvent by a Modified Phase Inversion Methodology |
| 2024-02-03 |
Hierarchical self?assembly of tannic acid/diethylenetriamine on polypropylene for high?performance separator |
| 2024-02-03 |
Aerospace, Vol. 11, Pages 134: Shape Morphing of 4D-Printed Polylactic Acid Structures under Thermal Stimuli: An Experimental and Finite Element Analysis |
| 2024-02-03 |
The Mechanical Performance and Reaction Mechanism of Slag-Based Organic–Inorganic Composite Geopolymers |
| 2024-02-03 |
Nanostructured Poly-l-lactide and Polyglycerol Adipate Carriers for the Encapsulation of Usnic Acid: A Promising Approach for Hepatoprotection |
| 2024-02-03 |
Mechanical and gas permeability properties of poly(L?lactic acid)–based films and their application in fresh produce preservation—Review |
| 2024-02-02 |
Electrochemical performances and antibacterial activity of green synthesized cobalt oxide nanoparticles and poly (o?Phenylenediamine) based textile supercapacitor |
| 2024-02-02 |
Development and Characterization of Edible Films Based on Cassava Starch Modified by Corona Treatment |
| 2024-02-02 |
Active Low-Density Polyethylene-Based Films by Incorporating α-Tocopherol in the Free State and Loaded in PLA Nanoparticles: A Comparative Study |
| 2024-02-02 |
Nanocellulose Composite Films in Food Packaging Materials: A Review |
| 2024-02-02 |
Study on Mechanical Properties and Microscopic Mechanism of PVA-Modified Recycled Brick Aggregate Concrete |
| 2024-02-02 |
Engineering the optical, and dielectric properties of (PVA: PVP)/BaSnO3 polymer nanocomposites as promising films for optoelectronics and energy storage applications |
| 2024-02-01 |
Hydrophobicity and mechanical properties of purified lignin nanoparticles reinforced marine?derived biopolymer composites |
| 2024-02-01 |
Enhancing Sustainability and Antifungal Properties of Biodegradable Composites: Caffeine-Treated Wood as a Filler for Polylactide |
| 2024-02-01 |
Innovative Electrospun Nanofiber Mats Based on Polylactic Acid Composited with Silver Nanoparticles for Medical Applications |
| 2024-02-01 |
Manipulating Microbial Cell Morphology for the Sustainable Production of Biopolymers |
| 2024-02-01 |
Enhanced Biodegradation Rate of Poly(butylene adipate-co-terephthalate) Composites Using Reed Fiber |
| 2024-02-01 |
Comparison of Emulsion Stabilizers: Application for the Enhancement of the Bioactivity of Lemongrass Essential Oil |
| 2024-02-01 |
Polyelectrolyte–Surfactant Complex Nanofibrous Membranes for Antibacterial Applications |
| 2024-01-31 |
Effect of raster angle on the fracture properties of additively manufactured ABS via essential work of fracture |
| 2024-01-31 |
A review on enhancing luminescence and colorimetric sensing in chitosan-based sensors with doping with organic and inorganic materials |
| 2024-01-31 |
In Situ Synthesis of Gold Nanoparticles from Chitin Nanogels and Their Drug Release Response to Stimulation |
| 2024-01-31 |
Cholesteric Liquid Crystals with Thermally Stable Reflection Color from Mixtures of Completely Etherified Ethyl Cellulose Derivative and Methacrylic Acid |
| 2024-01-31 |
Effects of Ferric Ions on Cellulose Nanocrystalline-Based Chiral Nematic Film and Its Applications |
| 2024-01-31 |
An Insight into the Characteristics of 3D Printed Polymer Materials for Orthoses Applications: Experimental Study |
| 2024-01-31 |
A Comprehensive Review of Sustainability in Natural-Fiber-Reinforced Polymers |
| 2024-01-31 |
Fast and Simple Fabrication of ternary PVA/CeO2/SiC Nanocomposites for Optoelectronic and Antimicrobial Applications |
| 2024-01-30 |
Enhancing Fatigue Resistance in Asphalt Mixtures with a Novel Additive Derived from Recycled Polymeric Fibers from End-of-Life Tyres (ELTs) |
| 2024-01-30 |
Anti?inflammatory Peptide?Conjugated Silk Fibroin/Cryogel Hybrid Dual Fiber Scaffold with Hierarchical Structure Promotes Healing of Chronic Wounds |
| 2024-01-30 |
Thermo-mechanical properties of silica-reinforced PLA nanocomposites using molecular dynamics: The effect of nanofiller radius |
| 2024-01-30 |
Sustainable Materials from Organosolv Fibers and Lignin, Kraft Fibers, and Their Blends |
| 2024-01-30 |
Biopolymers as Seed-Coating Agent to Enhance Microbially Induced Tolerance of Barley to Phytopathogens |
| 2024-01-30 |
Features of Changes in the Structure and Properties of a Porous Polymer Material with Antibacterial Activity during Biodegradation in an In Vitro Model |
| 2024-01-30 |
Kinetics of Periodate-Mediated Oxidation of Cellulose |
| 2024-01-29 |
Preparation and smoke suppression mechanism of flame?retardant PBS composites with BNNS@DOPA |
| 2024-01-29 |
Boron?polymer composites engineered for compression molding, foaming, and additive manufacturing |
| 2024-01-29 |
Interface Interaction between MoO3 and Carbon Dots Derived from Chitosan Promoted the Photocurrent Extraction Ability of Carriers in a Wide Range of the Light Spectrum |
| 2024-01-29 |
Effects of Polybutylene Succinate Content on the Rheological Properties of Polylactic Acid/Polybutylene Succinate Blends and the Characteristics of Their Fibers |
| 2024-01-29 |
Compatibilization of Cellulose Nanocrystal-Reinforced Natural Rubber Nanocomposite by Modified Natural Rubber |
| 2024-01-29 |
Poly(methyl methacrylate) in Orthopedics: Strategies, Challenges, and Prospects in Bone Tissue Engineering |
| 2024-01-29 |
Surface Modification of Flax Fibers with TMCTS-Based PECVD for Improved Thermo-Mechanical Properties of PLA/Flax Fiber Composites |
| 2024-01-28 |
Effect of the micro/nanostructured topography of polyetheretherketone on the behavior of MC3T3?E1 preosteoblasts |
| 2024-01-28 |
Immobilization of Enological Pectinase on Magnetic Sensitive Polyamide Microparticles for Wine Clarification |
| 2024-01-28 |
Influence of the Encapsulating Agent on the Bioaccessibility of Phenolic Compounds from Microencapsulated Propolis Extract during In Vitro Gastrointestinal Digestion |
| 2024-01-28 |
Electrospun Poly L-Lactic Acid Nanofiber Webs Presenting Enhanced Piezoelectric Properties |
| 2024-01-28 |
Polymers and Biomaterials for Posterior Lamella of the Eyelid and the Lacrimal System |
| 2024-01-27 |
Poly(ε-caprolactone)–Ionic Liquid Composite as Piezoionic Mechanical Sensor |
| 2024-01-27 |
Design and Development of an Edible Coating for a Ready-to-Eat Fish Product |
| 2024-01-26 |
Effects of Wheat Oligopeptide on the Baking and Retrogradation Properties of Bread Rolls: Evaluation of Crumb Hardness, Moisture Content, and Starch Crystallization |
| 2024-01-26 |
Effect of microcrystalline cellulose on the mechanical properties of flax reinforced methylmethacrylate and urethane acrylate composites |
| 2024-01-26 |
Biodeterioration of Cement and Cement–Polymer Mortars: Analysis of the Influence of the Structure and Distribution of Pores on the Humidity of Mortars Exposed to the Biological Environment |
| 2024-01-26 |
Enhancement of Strawberry Shelf Life via a Multisystem Coating Based on Lippia graveolens Essential Oil Loaded in Polymeric Nanocapsules |
| 2024-01-26 |
Cation-Selective Actuator–Sensor Response of Microcrystalline Cellulose Multi-Walled Carbon Nanotubes of Different Electrolytes Using Propylene Carbonate Solvent |
| 2024-01-26 |
“Nano in Nano”—Incorporation of ZnO Nanoparticles into Cellulose Acetate–Poly(Ethylene Oxide) Composite Nanofibers Using Solution Blow Spinning |
| 2024-01-26 |
Application of Chitosan-Based Hydrogel in Promoting Wound Healing: A Review |
| 2024-01-25 |
Effect of surface modification of microcrystalline cellulose with ionic liquids on natural latex composites |
| 2024-01-25 |
Bio-Based Polymers for Environmentally Friendly Phase Change Materials |
| 2024-01-25 |
Effect of Starch Plasticization on Morphological, Mechanical, Crystalline, Thermal, and Optical Behavior of Poly(butylene adipate-co-terephthalate)/Thermoplastic Starch Composite Films |
| 2024-01-24 |
Flexible polylactic acid/polyethylene glycol@erucamide microfibrous packaging with ordered fiber orientation |
| 2024-01-24 |
Biocomposites of Cellulose Isolated from Coffee Processing By-Products and Incorporation in Poly(Butylene Adipate-Co-Terephthalate) (PBAT) Matrix: An Overview |
| 2024-01-24 |
Crystallization of Polylactic Acid with Organic Nucleating Agents under Quiescent Conditions |
| 2024-01-24 |
Blow molding liquid crystal aromatic polyester/polyetherimide film by rotating die: Enhanced film bubble stability and mechanical properties |
| 2024-01-24 |
Exchangeable disulfide bond containing highly flexible epoxy vitrimers with shape?memory, self?healing, and UV shielding attributes |
| 2024-01-24 |
Molar mass determination via linear regression from SEC measurements: The case of polylactide, polycaprolactone and poly(2,2?dimethylthrimethylene carbonate) |
| 2024-01-23 |
Application of artificial neural network to evaluation of dimensional accuracy of 3D?printed polylactic acid parts |
| 2024-01-23 |
Kinetic, Thermodynamic, and Parametric Studies on Batch Synthesis of 1,1?Diethoxybutane Catalyzed by Amberlyst?15 Wet |
| 2024-01-23 |
PVA-TiO2 Nanocomposite Hydrogel as Immobilization Carrier for Gas-to-Liquid Wastewater Treatment |
| 2024-01-23 |
Short-Term Effect of Biopolymer-Based Coatings on Surface Hardness and Color of Limestone Exposed to Tropical Outdoor Conditions |
| 2024-01-23 |
Three-Dimensional-Printed Sodium Alginate and k-Carrageenan-Based Scaffolds with Potential Biomedical Applications |
| 2024-01-23 |
Characterization of Polyvinyl Alcohol (PVA)/Polyacrylic Acid (PAA) Composite Film-Forming Solutions and Resulting Films as Affected by Beeswax Content |
| 2024-01-23 |
Shape memory polylactic acid/modified Eucommia ulmoides gum thermoplastic vulcanizates based on excellent interfacial adhesion and co?continuous structure |
| 2024-01-22 |
Estimation of Digital Porosity of Electrospun Veils by Image Analysis |
| 2024-01-22 |
Properties of Heat-Treated Wood Fiber–Polylactic Acid Composite Filaments and 3D-Printed Parts Using Fused Filament Fabrication |
| 2024-01-22 |
Effect of supercritical nitrogen content on the weld lines and mechanical properties of microcellular injection molded double gate PP/Al parts |
| 2024-01-22 |
Photochromic performance optimization of polyurethane microcapsules by interfacial polymerization method |
| 2024-01-22 |
Effects of ionic liquids as catalysts on liquid crystal aromatic polyester based on thin?film polymerization technique |
| 2024-01-22 |
Effect of cyanide content on the tribological performance of nitrile butadiene rubber |
| 2024-01-22 |
An eco?friendly and high shear strength adhesive from catechol?modified polyethyleneimine |
| 2024-01-21 |
Biopolymeric Nanocomposites for Wastewater Remediation: An Overview on Recent Progress and Challenges |
| 2024-01-21 |
Differences in the Residual Behavior of a Bumetrizole-Type Ultraviolet Light Absorber during the Degradation of Various Polymers |
| 2024-01-20 |
Effect of trimethylene carbonate segments on the structure and properties of poly(L?lactide?glycolide?trimethylene carbonate) terpolymers for biodegradable vascular stents |
| 2024-01-20 |
Reinforcement of styrene?acrylonitrile polymer bulk with glass nanofibers to introduce photoluminescent bricks |
| 2024-01-20 |
Novel Magnesium Nanocomposite for Wire-Arc Directed Energy Deposition |
| 2024-01-20 |
Electrically Conductive Natural Rubber Composite Films Reinforced with Graphite Platelets |
| 2024-01-20 |
Degradation of Various Organic Coatings via UV?Generated Sulfate Radicals |
| 2024-01-20 |
Design of compostable toughened PLA/PBAT blend with algae via reactive compatibilization: The effect of algae content on mechanical and thermal properties of bio?composites |
| 2024-01-20 |
The AMPD1 Gene’s rs17602729 Polymorphism and Athletic Performance in Track and Field Athletes |
| 2024-01-20 |
The Performance of Cellulose Composite Membranes and Their Application in Drinking Water Treatment |
| 2024-01-20 |
Polysaccharide Composite Alginate–Pectin Hydrogels as a Basis for Developing Wound Healing Materials |
| 2024-01-20 |
Evaluation of Starch–Garlic Husk Polymeric Composites through Mechanical, Thermal, and Thermo-Mechanical Tests |
| 2024-01-19 |
Investigation of thermo?mechanical and viscoelastic properties of 3D?printed Morinda citrifolia particle reinforced poly(lactic acid) composites |
| 2024-01-19 |
Modeling of Effect of Infill Density Percentage on Rotating Bending Fatigue Behavior of Additive-Manufactured PLA Polymers |
| 2024-01-19 |
Biodegradable Polymer Packaging System for ‘Benitaka’ Table Grapes during Cold Storage |
| 2024-01-19 |
A Novel In-Line Measurement and Analysis Method of Bubble Growth-Dependent Strain and Deformation Rates during Foaming |
| 2024-01-19 |
Correction: Zhu et al. Mineralized Collagen/Polylactic Acid Composite Scaffolds for Load-Bearing Bone Regeneration in a Developmental Model. Polymers 2023, 15, 4194 |
| 2024-01-19 |
A Study of PLA Thin Film on SS 316L Coronary Stents Using a Dip Coating Technique |
| 2024-01-19 |
Development and Characterization of Sustainable Coatings on Cellulose Fabric and Nonwoven for Medical Applications |
| 2024-01-18 |
Green and efficient utilization of cellulose by in situ regenerating rod?like cellulose crystals in dry blending rubber compounds |
| 2024-01-18 |
Effect of silane coupling grafted polyethylene terephthalate foam and areca fruit fiber reinforced chitin modified vinyl ester prosthetic composite on thermal and water accelerated aging conditions |
| 2024-01-18 |
Unlocking the Power of Multicatalytic Synergistic Transformation: toward Environmentally Adaptable Organohydrogel |
| 2024-01-18 |
A Layer?by?Layer Self?Assembled Bio?Macromolecule Film for Stable Zinc Anode |
| 2024-01-18 |
Enhancing compressive strength in polymer composites utilized for application of foot prostheses |
| 2024-01-18 |
Direct Pellet Three-Dimensional Printing of Polybutylene Adipate-co-Terephthalate for a Greener Future |
| 2024-01-18 |
Two?phase anaerobic codigestion of a cassava starch?based biopolymer with papaya waste |
| 2024-01-18 |
Grafting modification bamboo kraft lignin and its performance in rigid polyurethane foams |
| 2024-01-18 |
Electrospun polyvinylidene fluoride with novel facile synthesized functionalized boron nitride quantum dots for neural applications |
| 2024-01-18 |
Effects of iron oxide and carbon nanotube contents on mechanical properties and shape memory behavior of biocompatible and biodegradable shape memory polymers |
| 2024-01-17 |
Near?infrared light response novel shape memory actuator based on photothermal rGO?TiO2 filler |
| 2024-01-17 |
Polycaprolactone Nanofibers Functionalized by Fibronectin/Gentamicin and Implanted Silver for Enhanced Antibacterial Properties, Cell Adhesion, and Proliferation |
| 2024-01-17 |
Improving the Physical and Mechanical Properties of Mycelium-Based Green Composites Using Paper Waste |
| 2024-01-17 |
Biodegradable Covalently Crosslinked Poly[N-(2-Hydroxypropyl) Methacrylamide] Nanogels: Preparation and Physicochemical Properties |
| 2024-01-16 |
Probing the interface structure of block copolymer compatibilizers in semicrystalline polymer blends |
| 2024-01-16 |
Electrospun Konjac Glucomannan/Polyvinyl Alcohol Long Polymeric Filaments Incorporated with Tea Polyphenols for Food Preservations |
| 2024-01-16 |
Study on the Performance Mechanism of Polyformaldehyde Glycol Ether Polymer for Crude Oil Recovery Enhancement |
| 2024-01-16 |
Polylactide-Based Nonisocyanate Polyurethanes: Preparation, Properties Evaluation and Structure Analysis |
| 2024-01-16 |
Polymeric Binder Design for Sustainable Lithium-Ion Battery Chemistry |
| 2024-01-16 |
Grafting Starch with Acrylic Acid and Fenton’s Initiator: The Selectivity Challenge |
| 2024-01-15 |
Rice Husk with PLA: 3D Filament Making and Additive Manufacturing of Samples for Potential Structural Applications |
| 2024-01-15 |
Recent Advances in Bio-Based Wood Protective Systems: A Comprehensive Review |
| 2024-01-15 |
PVTF Nanoparticles/PLA Electroactive Degradable Membrane for Bone Tissue Regeneration |
| 2024-01-15 |
Development of Gluten-Free Bread Production Technology with Enhanced Nutritional Value in the Context of Kazakhstan |
| 2024-01-15 |
Preparation of Protein A Membranes Using Propargyl Methacrylate-Based Copolymers and Copper-Catalyzed Alkyne–Azide Click Chemistry |
| 2024-01-15 |
Atmospheric Pressure Plasma Jet Exposure of Polylactic Acid Surfaces for Better Adhesion: Plasma Parameters towards Polymer Properties |
| 2024-01-15 |
Aloe vera/Chitosan-Based Edible Film with Enhanced Antioxidant, Antimicrobial, Thermal, and Barrier Properties for Sustainable Food Preservation |
| 2024-01-15 |
Collagen Matrix to Restore the Tympanic Membrane:Developing a Novel Platform to Treat Perforations |
| 2024-01-15 |
Specifics of Cryopreservation of Hydrogel Biopolymer Scaffolds with Encapsulated Mesenchymal Stem Cells |
| 2024-01-14 |
Cold Plasma Technology Based Eco-Friendly Food Packaging Biomaterials |
| 2024-01-14 |
Sustainable Materials with Improved Biodegradability and Toughness from Blends of Poly(Lactic Acid), Pineapple Stem Starch and Modified Natural Rubber |
| 2024-01-14 |
On mechanical characterization and damage analysis of additively manufactured continuous fiber/poly?lactic acid bio?composite using in?nozzle technique |
| 2024-01-13 |
Stiffening and softening of freshly prepared and aged CTA, PTMSP, and PIM?1 films exposed to volatile compounds |
| 2024-01-13 |
Snail Shell Waste Threat to Sustainability and Circular Economy: Novel Application in Food Industries |
| 2024-01-12 |
Enhancing Paper Packaging’s Wet Strength Using the Synergy between Chitosan and Nanofibrillated Cellulose Additives |
| 2024-01-12 |
Selectively transport and removal of fluoride ion by pillar[5]arene polymer?filled nanochannel membrane |
| 2024-01-12 |
Crystallization improvement of PLA by the talc with “grafting from” method of polymerization of lactide |
| 2024-01-12 |
Production of Nanofibers by Blow Spinning from Polylactide Containing Propolis and Beeswax |
| 2024-01-12 |
Comprehensive Development of a Cellulose Acetate and Soy Protein-Based Scaffold for Nerve Regeneration |
| 2024-01-12 |
Impact of Polylactic Acid Fibers in Cellulose Nonwoven Mulch Blends on Biodegradability and Performance—An Open Field Study |
| 2024-01-12 |
An Evaluation of the Wear Resistance of Electroplated Nickel Coatings Composited with 2,2,6,6-tetramethylpiperidine 1-oxyl-Oxidized Cellulose Nanofibers |
| 2024-01-12 |
Experimental synthesis and characterization of PVA?fumaric acid cross?linked biodegradable films: Implications as a sustainable matrix for composites |
| 2024-01-11 |
Development of Biodegradable Poly(butylene succinate) Based Nanofibrous Webs via Solution-Blow Spinning Technology for N95 Respiratory Filters |
| 2024-01-11 |
XGB Modeling Reveals Improvement of Compressive Strength of Cement-Based Composites with Addition of HPMC and Chitosan |
| 2024-01-11 |
Impact of Oil Addition on Physicochemical Properties and In Vitro Digestibility of Extruded Pineapple Stem Starch |
| 2024-01-11 |
Controlling the Architecture of Freeze-Dried Collagen Scaffolds with Ultrasound-Induced Nucleation |
| 2024-01-11 |
Biological and Mechanical Response of Graphene Oxide Surface?Treated Polylactic Acid 3D?Printed Bone Scaffolds: Experimental and Numerical Approaches |
| 2024-01-11 |
Review on functionalized pectin films for active food packaging |
| 2024-01-11 |
Morphological adaptation of expanded vermiculite in polylactic acid and polypropylene matrices for superior thermoplastic composites |
| 2024-01-10 |
A Tough Monolithic?Integrated Triboelectric Bioplastic Enabled by Dynamic Covalent Chemistry |
| 2024-01-10 |
Valorization of bio?calcium carbonate based Chamelea gallina shell waste fillers in shape memory polymer composites |
| 2024-01-10 |
Synthesis of bio?based poly(butylene carbonate?co?glycolic acid) with tunable degradation rate and mechanical properties |
| 2024-01-10 |
Sustainable chemically modified poly(butylene adipate-co-terephthalate)/thermoplastic starch/poly(?-caprolactone)/cellulose biocomposites: looking at the bulk through the surface |
| 2024-01-10 |
Optimizing the preparation of xanthate-modified polyvinyl alcohol adsorbent and its adsorption to Cu (II) |
| 2024-01-10 |
Studies on polyethylene glycol crosslinked chitosan nanoparticles for co-delivery of docetaxel and 5-fluorouracil with synergistic effect against cancer |
| 2024-01-10 |
Production of Lignin-Derived Functional Material for Efficient Electromagnetic Wave Absorption with an Ultralow Filler Ratio |
| 2024-01-10 |
Effect of Protein Surface Hydrophobicity and Surface Amines on Soy Adhesive Strength |
| 2024-01-10 |
Effect of Liquid Glass-Modified Lignin Waste on the Flammability Properties of Biopolyurethane Foam Composites |
| 2024-01-10 |
The Synthesis and Performance of a Novel Lignin Modified Salt-Resistant Branched High-Performance Water Reducer |
| 2024-01-10 |
Carboxymethyl Scleroglucan Synthesized via O-Alkylation Reaction with Different Degrees of Substitution: Rheology and Thermal Stability |
| 2024-01-10 |
Degradable Polymeric Bio(nano)materials and Their Biomedical Applications: A Comprehensive Overview and Recent Updates |
| 2024-01-10 |
Engineering antibacterial shrinkage?free trinary PLGA?based GBR membrane for bone regeneration |
| 2024-01-10 |
Valorization of kapok fiber by phosphorylation with a reactive phosphorus? and nitrogen?containing flame retardant for enhanced fire safety |
| 2024-01-09 |
Preparation and Oil Adsorption of Cellulose-graft-poly(butyl acrylate-N,N′-methylene Bisacrylamide) |
| 2024-01-09 |
Development and Test of Geogrid with Distributed Deformation Monitoring Function |
| 2024-01-09 |
Modified Biomass-Reinforced Polylactic Acid Composites |
| 2024-01-09 |
Phase Morphology and Mechanical Properties of Super-Tough PLLA/TPE/EMA-GMA Ternary Blends |
| 2024-01-09 |
Effect of Collector Rotational Speed on the Morphology and Structure of Solution Blow Spun Polylactic Acid (PLA) |
| 2024-01-09 |
Formulation and Characterization of Sustainable Algal-Derived Nanoemulgels: A Green Approach to Minimize the Dependency on Synthetic Surfactants |
| 2024-01-09 |
Magnesium Hydroxide as a Versatile Nanofiller for 3D-Printed PLA Bone Scaffolds |
| 2024-01-09 |
Synthesis and characterization of PEG/CS?AgNO3 polymer nanocomposites for flexible optoelectronic and energy storage applications |
| 2024-01-08 |
Development of Antibacterial Thermoplastic Starch with Natural Oils and Extracts: Structural, Mechanical and Thermal Properties |
| 2024-01-08 |
Application and Properties of Polyglycolic Acid as a Degradation Agent in MPU/HNBR Degradable Elastomer Composites for Dissolvable Frac Plugs |
| 2024-01-08 |
Development of a Novel Energy Saving and Environmentally Friendly Starch via a Graft Copolymerization Strategy for Efficient Warp Sizing and Easy Removal |
| 2024-01-08 |
MXene/Cellulose Hydrogel Composites: Preparation and Adsorption Properties of Pb2+ |
| 2024-01-08 |
Polymer electrolyte membrane based on PVA/LiClO4 nanocomposite reinforced cellulose nanocrystalline from corncob for lithium?ion battery |
| 2024-01-07 |
Biomass- and Carbon Dioxide-Derived Polyurethane Networks for Thermal Interface Material Applications |
| 2024-01-07 |
Powdered Cellulose Microblasting for Dry Cleaning Printed Works on Paper |
| 2024-01-07 |
Comparison of the Properties of Pullulan-Based Active Edible Coatings Implemented for Improving Sliced Cheese Shelf Life |
| 2024-01-06 |
Simultaneous Optimization of Deacetylation Degree and Molar Mass of Chitosan from Shrimp Waste |
| 2024-01-06 |
Preparation and Modification of Collagen/Sodium Alginate-Based Biomedical Materials and Their Characteristics |
| 2024-01-05 |
The Preparation and Characterization of Chitosan/Calcium Phosphate Composite Microspheres for Biomedical Applications |
| 2024-01-05 |
Preparation and Characterization of Perfluoropolyether-Silane@Ethye Cellulose Polymeric Microcapsules |
| 2024-01-04 |
Influence of Electrospinning Parameters on the Morphology of Electrospun Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) Fibrous Membranes and Their Application as Potential Air Filtration Materials |
| 2024-01-04 |
Prediction Models of Mechanical Properties of Jute/PLA Composite Based on X-ray Computed Tomography |
| 2024-01-04 |
Integral Valorization of Posidonia oceanica Balls: An Abundant and Potential Biomass |
| 2024-01-04 |
Fabrication of a packaging film based on PLA blends: The evolution of physical, mechanical, and rheological properties |
| 2024-01-03 |
Prevention of surface defects in calendered poly(vinyl chloride) sheets using a succinate?capped poly(caprolactone) additive |
| 2024-01-03 |
Optimizing Acoustic Performance: Electrospun Polycaprolactone Fiber Mat Associated with Melamine Foam and Fiber Glass Wool |
| 2024-01-03 |
Zein/polyvinyl alcohol?based electrospun nanofibrous films reinforced with nano?hydroxyapatite for efficient Cu(II) adsorption |
| 2024-01-03 |
Bioactive polymers for cosmetics: unleashing the potential of Chromohalobacter canadensis 28 |
| 2024-01-03 |
Grafting of perylene and naphthalene fluorophores onto chitosan for improved thermal, optical and electrical properties |
| 2024-01-03 |
Cellulose Functionalization Using N-Heterocyclic-Based Leaving Group Chemistry |
| 2024-01-03 |
A feasible way to modify microcrystalline cellulose powder and its reinforcing effect for NBR composites |
| 2024-01-03 |
Effects of polycaprolactone viscosity on morphology, mechanical properties, water uptake, and cellular viability in poly(3?hydroxybutyrate)/polycaprolactone blends for tissue engineering |
| 2024-01-02 |
Poly(ethylene glycol) Methyl Ether Acrylate-Grafted Chitosan-Based Micro- and Nanoparticles as a Drug Delivery System for Antibiotics |
| 2024-01-02 |
Oral nanotherapeutic formulation of insulin with reduced episodes of hypoglycaemia |
| 2023-12-31 |
Inhibition of Pro-Fibrotic Molecules Expression in Idiopathic Pulmonary Fibrosis—Derived Lung Fibroblasts by Lactose-Modified Hyaluronic Acid Compounds |
| 2023-12-31 |
Thermosensitive Chitosan Hydrogels: A Potential Strategy for Prolonged Iron Dextran Parenteral Supplementation |
| 2023-12-31 |
ZnO surface modification with maleic anhydride using plasma treatment |
| 2023-12-31 |
Rapid assessment of wetting of natural fiber surfaces by biodegradable copolyester using spectroscopic and microscopic techniques |
| 2023-12-30 |
A Novel Approach for Glycero-(9,10-trioxolane)-Trialeate Incorporation into Poly(lactic acid)/Poly(ɛ-caprolactone) Blends for Biomedicine and Packaging |
| 2023-12-30 |
Effect of Gelatin Coating and GO Incorporation on the Properties and Degradability of Electrospun PCL Scaffolds for Bone Tissue Regeneration |
| 2023-12-30 |
Supercritical Impregnation of Mangifera indica Leaves Extracts into Porous Conductive PLGA-PEDOT Scaffolds |
| 2023-12-30 |
Characterization of Moringa oleifera Seed Oil for the Development of a Biopackage Applied to Maintain the Quality of Turkey Ham |
| 2023-12-30 |
The Effect of Size on the Mechanical Properties of 3D-Printed Polymers |
| 2023-12-29 |
Enhancing Pectin Particles with Polymer Additives: Mitigating Rumen Degradation and Minimizing Yellowish Milk Color in Grazed Cows |
| 2023-12-29 |
Facile Strategy for Boosting of Inorganic Fillers Retention in Paper |
| 2023-12-29 |
PLA-Based Composite Panels Prepared via Multi-Material Fused Filament Fabrication and Associated Investigation of Process Parameters on Flexural Properties of the Fabricated Composite |
| 2023-12-29 |
Design of Experiment for Optimizing Microencapsulation by the Solvent Evaporation Technique |
| 2023-12-29 |
New Physico-Chemical Analysis of Magnesium-Doped Hydroxyapatite in Dextran Matrix Nanocomposites |
| 2023-12-28 |
Optical Limiting Properties of DNA Biopolymer Doped with Natural Dyes |
| 2023-12-28 |
Enhancing the Toughness of PAA/LCNF/SA Hydrogel through Double-Network Crosslinking for Strain Sensor Application |
| 2023-12-28 |
Development of fish scale particle reinforced PLA filaments for 3D printing applications |
| 2023-12-28 |
Effect of the shape of hydrogel samples on their stretch?fracture properties |
| 2023-12-28 |
Preparation of PVA/PVDF/PAM-U composite hydrogels by in situ polymerization of ternary DES and their properties study |
| 2023-12-28 |
Building structured, functional materials inspired by nature: Using peptides, peptoids, and polymerizations |
| 2023-12-28 |
Influence of cesium bromide nanoparticles on the structural, optical, electrical, and antibacterial properties of polyvinyl alcohol/sodium alginate for biological applications |
| 2023-12-27 |
Mechanical and electrical properties of 3D printed highly conductive reduced?graphene oxide/polylactic acid composite |
| 2023-12-27 |
High?performance self?healing anticorrosion epoxy coating based on microencapsulated epoxy?amine chemistry |
| 2023-12-27 |
The Investigation of the Production of Salt-Added Polyethylene Oxide/Chitosan Nanofibers |
| 2023-12-27 |
Biodegradable UV-Protective Composite Film from Cellulosic Waste: Utilisation of Cotton Gin Motes as Biocomponent |
| 2023-12-27 |
Recent Approaches to the Plasticization of Poly(lactic Acid) (PLA) (A Review) |
| 2023-12-27 |
Cheminformatics-Based Design and Synthesis of Hydroxyapatite/Collagen Nanocomposites for Biomedical Applications |
| 2023-12-27 |
Characterization of Natural and Synthetic Fabrics for the Treatment of Complex Wastes |
| 2023-12-26 |
Mechanical Properties and Reinforcement of Paper Sheets Composited with Carboxymethyl Cellulose |
| 2023-12-26 |
Preparation of aminated poly (L?lactic acid) film coated with multilayers of mussel?inspired heparin?like carboxymethylcellulose sodium and chitosan for anticoagulant materials |
| 2023-12-26 |
Efficient ring-opening polymerization of epsilon-caprolactone catalyzed by iron(III) chloride under mild reaction conditions |
| 2023-12-26 |
Utilization of Waste Natural Fibers Mixed with Polylactic Acid (PLA) Bicomponent Fiber: Incorporating Kapok and Cattail Fibers for Nonwoven Medical Textile Applications |
| 2023-12-26 |
Thermal resistance of polyurethane adhesives containing aluminum hydroxide and dealkaline or alkaline lignin |
| 2023-12-25 |
Formulation and Biodegradation of Surface-Supported Biopolymer-Based Microgels Formed via Hard Templating onto Vaterite CaCO3 Crystals |
| 2023-12-25 |
Exploring Extremophiles from Bulgaria: Biodiversity, Biopolymer Synthesis, Functional Properties, Applications |
| 2023-12-25 |
Determination of Pair Interaction Parameters of Multicomponent Polymer Systems |
| 2023-12-24 |
Fabrication and Performance of Continuous 316 Stainless Steel Fibre-Reinforced 3D-Printed PLA Composites |
| 2023-12-24 |
Influence of Epilobium parviflorum Herbal Extract on Physicochemical Properties of Thermoplastic Starch Films |
| 2023-12-24 |
Poly-ε-Caprolactone 3D-Printed Porous Scaffold in a Femoral Condyle Defect Model Induces Early Osteo-Regeneration |
| 2023-12-22 |
A renewable cellulose-rich biofiller material extracted from waste banana stem fibers for reinforcing natural rubber composites |
| 2023-12-22 |
Synergistic Effects of 9,10-Dihydro-9-oxa-10-phosphaphenanthrene-10-oxide-Based Derivative and Modified Sepiolite on Flame-Retarded Poly (Ethylene Oxide)–Poly (Butylene Adipate-Co-Terephthalate) Composites |
| 2023-12-22 |
Hybrid Polymer–Inorganic Materials with Hyaluronic Acid as Controlled Antibiotic Release Systems |
| 2023-12-22 |
Recycling Ophthalmic Lens Wastewater in a Circular Economy Context: A Case Study with Microalgae Integration |
| 2023-12-22 |
Lignin Nanoparticles Produced from Wheat Straw Black Liquor Using γ-Valerolactone |
| 2023-12-22 |
A Review on Barrier Properties of Cellulose/Clay Nanocomposite Polymers for Packaging Applications |
| 2023-12-22 |
Catalysts Based on Nanoscale Iron and Cobalt Immobilized on Polymers for Catalytic Oxidation of Aromatic Hydrocarbons: Synthesis, Physico-Chemical Studies, and Tests of Catalytic Activity |
| 2023-12-21 |
The Evolution of the Intrinsic Flexural Strength of Jute Strands after a Progressive Delignification Process and Their Contribution to the Flexural Strength of PLA-Based Biocomposites |
| 2023-12-21 |
Nano Boron Oxide and Zinc Oxide Doped Lignin Containing Cellulose Nanocrystals Improve the Thermal, Mechanical and Flammability Properties of High-Density Poly(ethylene) |
| 2023-12-21 |
Simultaneous Production of Cellulose Nitrates and Bacterial Cellulose from Lignocellulose of Energy Crop |
| 2023-12-20 |
Aging Process of Biocomposites with the PLA Matrix Modified with Different Types of Cellulose |
| 2023-12-20 |
Incorporation of Cellulose-Based Aerogels into Textile Structures |
| 2023-12-20 |
Strengthened Decellularized Porcine Valves via Polyvinyl Alcohol as a Template Improving Processability |
| 2023-12-20 |
Citryl-Imino-Chitosan Xerogels as Promising Materials for Mercury Recovery from Waste Waters |
| 2023-12-20 |
A New Microwave-Assisted Protocol for Cellulose Extraction from Eucalyptus and Pine Tree Wood Waste |
| 2023-12-20 |
Mechanical, Crystallization, Rheological, and Supercritical CO2 Foaming Properties of Polybutylene Succinate Nanocomposites: Impact of Carbon Nanofiber Content |
| 2023-12-20 |
Prebiotic Cellulose–Pullulan Matrix as a “Vehicle” for Probiotic Biofilm Delivery to the Host Large Intestine |
| 2023-12-19 |
Structured polymer dispersant for efficient phthalocyanine blue dispersion and color paste preparation |
| 2023-12-19 |
Classifications, synthesis and applications of biodegradable pseudo-proteins: a review |
| 2023-12-19 |
Nanostructural Characterization of Luminescent Polyvinyl Alcohol/Graphene Quantum Dots Nanocomposite Films |
| 2023-12-19 |
Effect of Shock-Variable Environmental Temperature and Humidity Conditions on 3D-Printed Polymers for Tensile Properties |
| 2023-12-19 |
Facilitated Transport across Glycocalyceal Barriers in the Chick Chorioallantoic Membrane |
| 2023-12-19 |
Propagation of Sounds through Small Panels Made of Polymer Materials by 3D Printing |
| 2023-12-19 |
Photocrosslinkable Cellulose Derivatives for the Manufacturing of All-Cellulose-Based Architectures |
| 2023-12-19 |
Biopolymers as a Potential Alternative for the Retention of Pollutants from Vinasse: An In Silico Approach |
| 2023-12-19 |
Superhydrophilic and Underwater Superoleophobic Copper Mesh Coated with Bamboo Cellulose Hydrogel for Efficient Oil/Water Separation |
| 2023-12-19 |
Application of Biopolymers as Sustainable Cladding Materials: A Review |
| 2023-12-18 |
Effect of Topology Parameters on Physical–Mechanical Properties of Magnetic PLA 3D-Printed Structures |
| 2023-12-18 |
Hierarchical Hybrid Coatings with Drug-Eluting Capacity for Mg Alloy Biomaterials |
| 2023-12-18 |
Evaluation of Chemical and Morphological Properties of Spruce Wood Stored in the Natural Environment |
| 2023-12-18 |
Use of Bio-Epoxies and Their Effect on the Performance of Polymer Composites: A Critical Review |
| 2023-12-18 |
Manufacture and Combustion Characteristics of Cellulose Flame-Retardant Plate Through the Hot-Press Method |
| 2023-12-18 |
A novel bio?based charcoal?forming agent based on chitosan and phytate@Mg to improve the flame retardancy of poly(lactic acid) |
| 2023-12-18 |
Highly sulfur-loaded dual-conductive cathodes based on nanocellulose for lithium-sulfur batteries |
| 2023-12-18 |
Using supramolecular polymerization of DNA to produce tandem repeat proteins |
| 2023-12-17 |
Simulation of a Composite with a Polyhydroxybutyrate (PHB) Matrix Reinforced with Cylindrical Inclusions: Prediction of Mechanical Properties |
| 2023-12-17 |
Synthesis and Properties of Modified Biodegradable Polymers Based on Caprolactone |
| 2023-12-16 |
Multifunctional and pH?responsive dialdehyde cellulose/polyvinyl alcohol composite film reinforced with curcumin |
| 2023-12-15 |
Active and Intelligent Biodegradable Packaging Based on Anthocyanins for Preserving and Monitoring Protein-Rich Foods |
| 2023-12-15 |
Optimization of the Centrifugal Spinning Parameters to Prepare Poly(butylene succinate) Nanofibers Mats for Aerosol Filter Applications |
| 2023-12-15 |
The 3D Printing of Novel Honeycomb–Hollow Pyramid Sandwich Structures for Microwave and Mechanical Energy Absorption |
| 2023-12-15 |
Depolymerization of Pine Wood Organosolv Lignin in Ethanol Medium over NiCu/SiO2 and NiCuMo/SiO2 Catalysts: Impact of Temperature and Catalyst Composition |
| 2023-12-15 |
Effect of Bletilla Striata Polysaccharide on the Pasting, Rheological and Adhesive Properties of Wheat Starch |
| 2023-12-14 |
Influence of 3D Printing Direction in PLA Acoustic Guitars on Vibration Response |
| 2023-12-14 |
Photodegradation of polyethylene debris in water by sulfur-doped TiO2: system optimization, degradation mechanism, and reusability |
| 2023-12-14 |
Bio-Based Alkali Lignin Cooperative Systems for Improving the Flame Retardant and Mechanical Properties of Rigid Polyurethane Foam |
| 2023-12-14 |
Research Advances in Wood Composites in Applications of Industrial Wastewater Purification and Solar-Driven Seawater Desalination |
| 2023-12-13 |
Development of biodegradable filaments based on agro?industrial waste and evaluation of process parameters in final properties |
| 2023-12-13 |
Fibrillar Hydrogel Based on Cellulose Nanocrystals Crosslinked via Diels–Alder Reaction: Preparation and pH-Sensitive Release of Benzocaine |
| 2023-12-13 |
Preparation and Characterization of PHBV/PCL-Diol Blend Films |
| 2023-12-13 |
What Are “Bioplastics”? Defining Renewability, Biosynthesis, Biodegradability, and Biocompatibility |
| 2023-12-13 |
Optimization of Printing Process Variables and the Effect of Post-Heat Treatments on the Mechanical Properties of Extruded Polylactic Acid–Aluminum Composites |
| 2023-12-13 |
Innovative Biobased and Sustainable Polymer Packaging Solutions for Extending Bread Shelf Life: A Review |
| 2023-12-13 |
Improving the Physical Properties of Starch-Based Powders for Potential Anti-Adhesion Applications |
| 2023-12-13 |
Development of an In Situ Photo-Crosslinking Antimicrobial Collagen Hydrogel for the Treatment of Infected Wounds |
| 2023-12-13 |
Development of biodegradable coatings by the incorporation of essential oils derived from food waste: A new sustainable packaging approach |
| 2023-12-13 |
Enhancing cryogenic thermal conductivity of epoxy composites through the incorporation of boron nitride nanosheets/nanodiamond aerogels prepared by directional?freezing method |
| 2023-12-12 |
Thermo?mechanical and antioxidant properties of eugenol?loaded carrageenan?cellulose nanofiber films for sustainable packaging applications |
| 2023-12-12 |
Synergistic Stabilization of Nanoemulsion Using Nonionic Surfactants and Salt-Sensitive Cellulose Nanocrystals |
| 2023-12-12 |
The Potential of Soluble Proteins in High-Moisture Soy Protein–Gluten Extrudates Preparation |
| 2023-12-12 |
Electron-Beam-Initiated Crosslinking of Methacrylated Alginate and Diacrylated Poly(ethylene glycol) Hydrogels |
| 2023-11-28 |
Influence of Guluronic and Mannuronic Groups in Sodium Alginate Blends with Silk Fibroin: Phase Equilibrium and Thermodynamic Modeling |
| 2023-11-25 |
Polylactic Acid?Based Film Modified with Nano?Ag?Graphene?TiO2: New Film versus Recycled Film |
| 2023-08-02 |
Mechanical Interlocking Approaches to the Prediction of Mechanical and Tribological Behavior of Natural Fiber?Reinforced Polymer Hybrid Nanocomposites or Automotive Applications |
| 2023-05-26 |
The Properties of Tannery Waste Addition as a Filler Based on Two Types of Polymer Matrices: Poly(Butylene Adipate?Co?Terephthalate) (PBAT) and Poly(Butylene Succinate) (PBS) |
| 2023-05-24 |
Isosorbide?Based Thermoplastic Polyurethane with Different Polyols and Soft/Hard Ratios |
| 2023-05-02 |
Nontraditional Natural Filler?Based Biocomposites for Sustainable Structures |
